BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
      Yesterday, 10:48 AM   #1
UncleWede
Long Time Admirer, First Time Owner
UncleWede's Avatar
United_States
9986
Rep
8,496
Posts

Drives: E90 325i Arctic
Join Date: Jun 2005
Location: Oxnard, CA

iTrader: (0)

a
Attached Images
 
Appreciate 1
      Yesterday, 10:49 AM   #2
UncleWede
Long Time Admirer, First Time Owner
UncleWede's Avatar
United_States
9986
Rep
8,496
Posts

Drives: E90 325i Arctic
Join Date: Jun 2005
Location: Oxnard, CA

iTrader: (0)

or C
Attached Images
 
Appreciate 1
GenXer679.00

      Yesterday, 12:08 PM   #3
rwheels
Lieutenant
1756
Rep
565
Posts

Drives: E93 M3
Join Date: May 2020
Location: California

iTrader: (0)

Just my opinion, but I would go with "a". The second one looks photoshopped, if you will; rather busy.
Appreciate 1
Murf9933533.50

      Yesterday, 12:32 PM   #4
ScottSinger
Brigadier General
1863
Rep
4,786
Posts

Drives: M235i 6spd
Join Date: Dec 2013
Location: Mid-Atlantic

iTrader: (0)

are both pieces the same smoothness ? I'd probably choose A also for furniture quality.

But B would make a really good looking box or something.

Are both pieces cut to size and sanded or are you going to add finish ?
Appreciate 0
      Yesterday, 01:21 PM   #5
AnOldBiker
Jim
AnOldBiker's Avatar
United_States
225
Rep
141
Posts

Drives: 2019 X5 XDrive 40i
Join Date: Sep 2018
Location: Land of Retirement

iTrader: (0)

Most ply has an A and B side.
The A is best and is usually on the seen side.
Appreciate 0
      Yesterday, 01:25 PM   #6
UncleWede
Long Time Admirer, First Time Owner
UncleWede's Avatar
United_States
9986
Rep
8,496
Posts

Drives: E90 325i Arctic
Join Date: Jun 2005
Location: Oxnard, CA

iTrader: (0)

It's already cut for the table and each side has a single coat of varnish at this point. These are BBQ tables that used to have particle board as a top

Here's the one I finished last week
Attached Images
 
Appreciate 2
      Yesterday, 02:41 PM   #7
RickFLM4
Brigadier General
RickFLM4's Avatar
United_States
5130
Rep
4,081
Posts

Drives: M4
Join Date: Jul 2015
Location: PB County, FL

iTrader: (0)

I’d say c.
__________________
Current: 2018 SO/SS F83 ZCP
Gone: 2015 SO/SO F82

Last edited by RickFLM4; Yesterday at 04:53 PM..
Appreciate 0
      Yesterday, 04:26 PM   #8
GenXer
Captain
United_States
679
Rep
786
Posts

Drives: Like a bat out of hell.
Join Date: Apr 2019
Location: here and there

iTrader: (0)

Garage List
I like the knot in the wood
Appreciate 0
      Yesterday, 04:31 PM   #9
BimmerDimmer6
Captain
BimmerDimmer6's Avatar
United_States
1249
Rep
721
Posts

Drives: 2016 F80 M3 6MT / 2019 Raptor
Join Date: Apr 2020
Location: Tampa Fl

iTrader: (0)

What kind of table? Like where is it going to be used?
Appreciate 0
      Yesterday, 04:33 PM   #10
UncleWede
Long Time Admirer, First Time Owner
UncleWede's Avatar
United_States
9986
Rep
8,496
Posts

Drives: E90 325i Arctic
Join Date: Jun 2005
Location: Oxnard, CA

iTrader: (0)

Quote:
Originally Posted by BimmerDimmer6 View Post
What kind of table? Like where is it going to be used?
Outdoors

This plywood is A/C
Appreciate 0
      Yesterday, 04:47 PM   #11
BimmerDimmer6
Captain
BimmerDimmer6's Avatar
United_States
1249
Rep
721
Posts

Drives: 2016 F80 M3 6MT / 2019 Raptor
Join Date: Apr 2020
Location: Tampa Fl

iTrader: (0)

Quote:
Originally Posted by UncleWede View Post
Quote:
Originally Posted by BimmerDimmer6 View Post
What kind of table? Like where is it going to be used?
Outdoors

This plywood is A/C
I see. Well, personally, I would go with "C" if it was varnished/stained something a bit darker. Looks too plain the wait is now imo. Needs some spice if you will.
Appreciate 0
      Yesterday, 07:34 PM   #12
vreihen16
Lieutenant
vreihen16's Avatar
United_States
2321
Rep
510
Posts

Drives: 2015 BMW i3 BEV
Join Date: Jun 2019
Location: Orange County, NY

iTrader: (0)

Garage List
Personally, I'd lay out today's newspaper on either side, and hit it with several coats of "clear" polyurethane. Every single time that I have ever tried to finish wood, it always ends up with newspaper embedded in the finish. I said that if I were ever doing wood finishing again that I would intentionally seal the newspaper onto the finished surface to save myself some time.....
__________________
2015 BMW i3 BEV, Giga World (Lodge interior), Tech/Driving Assist Packages, 18K miles
Appreciate 1
UncleWede9986.00

      Yesterday, 07:55 PM   #13
iminhell1
C2H5OH
iminhell1's Avatar
United_States
1698
Rep
1,806
Posts

Drives: 2010 SG 135i auto
Join Date: May 2015
Location: Darwin, MN

iTrader: (1)

Both are ugly IMHO.

Burn the A side prior to finishing. Liven it up some.


C the knots just look to machine and not organic.
__________________
FBO (RB EVO inlets, Phoenix Racing 7.5" race, CP-e relocate / Tial, 1320 DP's, Berk mids, Custom E tune, XHP Stg III)
11.480 @ 121, 3,600#
2020: Speedtech, PTE 6766, 7.5"race, VTT DBBL, 2x450's, PR coils, Berk mids, E85
Appreciate 0
      Today, 06:03 AM   #14
Emilime75
Lieutenant Colonel
769
Rep
1,810
Posts

Drives: 2010 335i E92 LeMans Blue
Join Date: Dec 2017
Location: Merica!

iTrader: (1)

Quote:
Originally Posted by UncleWede View Post
Outdoors

This plywood is A/C
A/C, alone, doesn't mean it is suitable for outdoor use. That is just the surface ply "quality" designation, i.e. one side is A grade, while the other is C grade...like what you show in your photos where one side has all of the knots(C) and the other doesn't(A).

For it to be suitable for outdoor use, there need to be additional designations, which vary by manufacturer and will say things like "exterior", "exposure x", "x"...you pretty much have to look up the manufacturer's spec sheet to determine what it is. To take that further, most plywoods that have an exposure rating can only withstand that exposure a limited amount of time before they begin to fail and delaminate.

Last edited by Emilime75; Today at 12:51 PM..
Appreciate 0
      Today, 12:23 PM   #15
Maynard
Colonel
United_States
1586
Rep
2,052
Posts

Drives: 2016 228iX
Join Date: Mar 2016
Location: Upstate NY

iTrader: (0)

I vote side A. They make a marine polyurethane that is VERY durable, but if it isn't true exterior grade it will only be a matter of time. I'd use it on the finished one, either way, since you already have the time into it. But wouldn't sink more time into cutting/sanding more if it isn't exterior grade (looks like it would make nice shelving or other inside uses).
Appreciate 0
      Today, 02:09 PM   #16
UncleWede
Long Time Admirer, First Time Owner
UncleWede's Avatar
United_States
9986
Rep
8,496
Posts

Drives: E90 325i Arctic
Join Date: Jun 2005
Location: Oxnard, CA

iTrader: (0)

Outside folding table when I take it out of storage. For the day at most. Won't be leaving it out in the elements
Appreciate 0
      Today, 03:57 PM   #17
ScottSinger
Brigadier General
1863
Rep
4,786
Posts

Drives: M235i 6spd
Join Date: Dec 2013
Location: Mid-Atlantic

iTrader: (0)

Quote:
Originally Posted by UncleWede View Post
Outside folding table when I take it out of storage. For the day at most. Won't be leaving it out in the elements
Very cool you reclaimed the wood from the particle board top.


Really nice work !
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:30 PM.




6post.com
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST