2020 What Did You Do To Your 6-Series Today?

[BmwF06Ireland]

Originally Posted by benacto

much better than chrome.

Door handles will be another job to do.


Want to order the diamond grille also think it will modernise the front

[board57796]

Originally Posted by BmwF06Ireland

Wrapped my wing trim in gloss black, not sure if i like it

That is a gorgeous silver.

[BmwF06Ireland]

Originally Posted by board57796

That is a gorgeous silver.

Its Moonstone, not really silver.
In the log book when i bought it , colour was down as yellow

[Junebug85]

Originally Posted by BmwF06Ireland

Wrapped my wing trim in gloss black, not sure if i like it

Once you do the handles it will all tie in

[board57796]

Originally Posted by BmwF06Ireland

Its Moonstone, not really silver.
In the log book when i bought it , colour was down as yellow

Oh. Sorry.

[itzjoker]

First first cosmetic mod

[Frupal]

Originally Posted by stl2chi

after spending over $1k for an oil change, brake flush, cabin filter and spark plug change at 38K miles... I added these oem floating center caps

https://www.shopbmwusa.com/PRODUCT/6...NG-CENTER-CAPS

I want these!!

[NorthCountryGuy]

New oil/filter this morning.

[Junebug85]

Diffuser removed - going to attempt a gloss black wrap

[pdubq]

Originally Posted by Junebug85

Diffuser removed - going to attempt a gloss black wrap

That’s such a great idea! I can’t wait to see how it turns out!!

[benacto]

Originally Posted by Junebug85

Diffuser removed - going to attempt a gloss black wrap

that's gonna take some serious skills... with the amount of curves and bends.

[Junebug85]

Originally Posted by benacto

that's gonna take some serious skills... with the amount of curves and bends.

I know!

[TON-III]

Originally Posted by benacto

that's gonna take some serious skills... with the amount of curves and bends.

Could be more easy fix by painting ? Or would you like to get it back to std sometimes ?

[MARKPRIOR]

Originally Posted by TON-III

Could be more easy fix by painting ? Or would you like to get it back to std sometimes ?

i did this about a year ago in dry carbon, TBH was much easier than the interior as the curves are bigger and much easier to work with

[Junebug85]

Originally Posted by TON-III

Could be more easy fix by painting ? Or would you like to get it back to std sometimes ?

It will only go back to standard when it's time to sell.

[NorthCountryGuy]

Went back in to install this aluminum oil filter cover.
Changed my oil the other day but thought the Weistec unit was faulted. It needed the ‘fastening’ piece from the existing cover removed, and then installed in it. I didn’t know that. Saw it on YouTube for another aluminum cover replacement.
Used the below seen long nose vise grip gingerly to get the piece out of the existing cover. Was easy. Snapped right in the new piece. Was a good thing I bought this piece. The BMW tool would not get the old oil filter cover off. Would just slip. I had torqued it on to 40Nm two days ago. Had to use other tools to get it off. Now will go on & off with a 32mm socket. 6mm Hex for the drain bolt.

[benacto]

dropped my M6 off for the brake light recall and regular service. dealership gave me a brand new X7 as a loaner for the next couple days. they're really comfortable and roomy.

[Msane]

First detail since my ownership

[TGG]

Originally Posted by BmwF06Ireland

Door handles will be another job to do.


Want to order the diamond grille also think it will modernise the front

Non-vertical slat grilles are much beefier looking. First thing I did was to replace the grille. You won't be sorry.

[benacto]

Got her back from service and recall of 3rd brake light today. Installed new buttons

[Tungmeister]

Finally got round to finishing off my NBT Evo retrofit by adding a g30 touchscreen. Took a lot of dremeling to the back of it to get it to fit and it's now held in with Araldite but it's working perfectly and I'm really pleased with it! (Previous mod also in the shot )

[rasa bmw]

drove it