05-14-2020, 03:47 PM | #1 |
Lieutenant
134
Rep 441
Posts |
Sizing up Tires but Spacers are tricky
I'm going to be sizing up on my tires (275/305) from the OEM specs, but I'd like to also space out my stock 343M wheels.
The plan is go with IND's (Future Classic) 10/12mm spacers, but not sure which one should go on the front vs. rear given the size up on Tires. Secondly, there all this jargon about three depth, and opened lugs/studs/nuts etc. that I'm getting confused on -- so need some help. 1. Do i need to purchase lug extensions (if so, what MM) to accommodate project Kix -- as in do I need a (https://ind-distribution.com/collect...conversion-kit) lug extension? If so how do I spec out the thread pitch and stud length. 2. These are the Lugs I'd like (https://ind-distribution.com/collect...ng-lug-nut-set) but not sure if the 54mm will work with the spacers (either 10/12mm). and, 3. FC has these (https://ind-distribution.com/collect...onversion-80mm) for sale but Money2536 had some issues with implementing the Lugs because the future classic studs with the kit are too short? If so, will 80mm work? Thanks for all the help. Cheers and have an Excellent Day! H |
05-14-2020, 05:49 PM | #2 |
Captain
249
Rep 626
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
The safe thing is to ask IND before you place the order. If it turns out to be wrong you can resolve it easier. You will need roughly 1.25 times the diameter (~ 18mm) of thread engagement. Note: the M6 uses 14 x 1.25 mm thread.
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Appreciate
0
|
05-15-2020, 12:46 AM | #3 |
Colonel
1310
Rep 2,349
Posts |
I'm running 10mm wider at the front and 20mm wider at the rear, so the top corner of my tyres will be 5mm and 10mm further out than yours. I'm effectively running a 6mm spacer at the front and a 1mm at the rear.
So if you got 11mm at the front and 11mm at the rear the top corner of your tyres would be in the same place as my car. I think that 10mm or 12mm will be around right https://www.6post.com/forums/showthr...ht=325%2F30r20
__________________
SCOTT26 "So as an admirer of the M5 and a potential customer of an M5 Touring. I would run naked around the streets of Garching if they were to offer one."
|
Appreciate
0
|
05-15-2020, 07:29 AM | #4 |
Private First Class
102
Rep 187
Posts |
So are you wanting to convert to lugs? My spacers came with extended studs.
I would say try the 12 in the rear first then if you have to switch them around its pretty simple. |
Appreciate
0
|
05-15-2020, 09:48 PM | #5 |
Lieutenant
261
Rep 582
Posts |
Here some pics ,Stock suspension ,stock 433 wheels 265/35/20 in front, Rear is 305/30/20 ,Future classic spacers 10mm front 10 mm rear zero rubbing didn't go 12mm in rear to leave more space for wider tires.when I take wheels off all the lug bolts are compatible,no different sizes to deal with
__________________
2015 M6 Gran Coupe> DME stage 3 tune back end flash>JB4 with Methanol control>Fabworx Catless downpipes>Full Meistershaft GTC exhaust 102mm GB tips>Built motor with Forged Cp Carillo Rods and Pistons > SSP spec X clutch > Stage 1 Pure Turbos>PG front mount intakes>PG charge coolers>Vorsteiner front and rear Carbon diffuser>Auto Tecknic Carbon shift paddles>3D Design aluminum pedals
|
Appreciate
2
hirkaismyname134.00 Havy292.00 |
05-18-2020, 09:56 AM | #6 | |
Enlisted Member
12
Rep 30
Posts |
Quote:
So you think with the 10mm spacer a 315 would fit ok? Also I'd like to see more pics of the wheels. Been thinking of getting my 433 done in black also. |
|
Appreciate
0
|
05-18-2020, 03:41 PM | #7 | |
Captain
292
Rep 707
Posts |
Quote:
|
|
Appreciate
0
|
05-18-2020, 06:43 PM | #8 |
Lieutenant
261
Rep 582
Posts |
Im not sure if 315s will fit you might have to take rear spacers off for that ,Im running michelin 4s now but to get a little more traction Michelin CUP2s will be a little better
__________________
2015 M6 Gran Coupe> DME stage 3 tune back end flash>JB4 with Methanol control>Fabworx Catless downpipes>Full Meistershaft GTC exhaust 102mm GB tips>Built motor with Forged Cp Carillo Rods and Pistons > SSP spec X clutch > Stage 1 Pure Turbos>PG front mount intakes>PG charge coolers>Vorsteiner front and rear Carbon diffuser>Auto Tecknic Carbon shift paddles>3D Design aluminum pedals
|
Appreciate
0
|
05-20-2020, 09:44 PM | #9 | |
Lieutenant
261
Rep 582
Posts |
Quote:
Im gonna take more pics on the car at different angles soon I will post then for you.
__________________
2015 M6 Gran Coupe> DME stage 3 tune back end flash>JB4 with Methanol control>Fabworx Catless downpipes>Full Meistershaft GTC exhaust 102mm GB tips>Built motor with Forged Cp Carillo Rods and Pistons > SSP spec X clutch > Stage 1 Pure Turbos>PG front mount intakes>PG charge coolers>Vorsteiner front and rear Carbon diffuser>Auto Tecknic Carbon shift paddles>3D Design aluminum pedals
Last edited by Whipple; 05-21-2020 at 10:18 PM.. |
|
Appreciate
0
|
05-29-2020, 08:26 AM | #10 |
Enlisted Member
12
Rep 30
Posts |
They look killer! Really thinking they will work well with my Moonstone.
|
Appreciate
0
|
05-29-2020, 11:11 PM | #11 |
Lieutenant
261
Rep 582
Posts |
Oh yeah on Moonstone they will look sick!The gloss black will make that color pop
__________________
2015 M6 Gran Coupe> DME stage 3 tune back end flash>JB4 with Methanol control>Fabworx Catless downpipes>Full Meistershaft GTC exhaust 102mm GB tips>Built motor with Forged Cp Carillo Rods and Pistons > SSP spec X clutch > Stage 1 Pure Turbos>PG front mount intakes>PG charge coolers>Vorsteiner front and rear Carbon diffuser>Auto Tecknic Carbon shift paddles>3D Design aluminum pedals
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|