09-07-2019, 12:54 PM | #1 |
Private
25
Rep 71
Posts |
RK Carbon Fiber intake help!!
Installing my intake and I’m confused. They only gave me 2 hose clamps (assuming they are for the boot to metal sleeve on each side) filters have clamps on them.... but. Is there no kind of clamp for the rubber boot to the CF pipe??
Having a hard time figuring how this all gets through the channel under the hood latches. I removed all plastics from old intake
__________________
1997 HMC4 Hummer H1
2003 KSC2 Hummer H1 1969 Jaguar XKE 2014 M6 GC |
09-07-2019, 07:26 PM | #3 |
Captain
366
Rep 804
Posts |
Put some oil or spray wax on the outside of the rubber sleeves to push them through the plastic holes and connect them to the CF pipes. Makes things a lot easier. I fold them and pop them through so you don't kill your hands in the process. First time was a pain in the a$$. Oh and don't over tighten the screws for the MAF sensors, the inserts in the CF pipes are delicate, just hand tight snug, no need for torque on them.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|