DRIVETRAIN MALFUNCTION/DRIVE MODERATELY Warning - UPDATE

[tepelen]

I know this is an old post, but I had the same issue. There is an article on Youcanic that goes over this problem in detail and explains the issue very well.

[xlr8tin]

Originally Posted by NorthCountryGuy

The Guys at Cantech Motor Works in North Syracuse did a first rate job.
The vehicle’s malfunction and codes were speaking to a signal malfunction and not an actual hardware malfunction.
I’m pretty good with auto electrics, but I couldn’t solve it.
Even having ISTA, Mike (the SA) said it was a difficult case.
It ended up being a broken wire in the BUS of the crankshaft sensor circuit.
What I did find was a new found respect for the tenacity of the the tech of record in this case.
Case closed.

I have the exact same issue. It started with the transmission overheating. Many fixed and dollars spent later and it came back. I have all the codes you did.

You mentioned a broken wire. Were you shown the location or just told that you had one. I need to narrow this down for my mechanic since they can't figure it out

[Opie55]

Originally Posted by xlr8tin

I have the exact same issue. It started with the transmission overheating. Many fixed and dollars spent later and it came back. I have all the codes you did.

You mentioned a broken wire. Were you shown the location or just told that you had one. I need to narrow this down for my mechanic since they can't figure it out

The person you are asking has not visited the forum in nearly four years.

[xlr8tin]

That figures