Aggressive wheel and tires setup guys

[bizzmeister]

Hey guys,

So my wheel and tire setup is stock right now. I have searched but unfortunately this forum moves at a snails pace and there isn't much 'new' content daily as far as our car goes.


Was wondering if you guys could post up some aggressive setups you run with 20" and 21" wheel/tire specs listed also.

Will a 21" wheel and 315/25/21 or 315/30/21 work with a stock bodied M6/M6 Gran Coupe?



Any pics or advice appreciated!

[atillathetom]

You can run up to a 325/25/21 or 325/30/21 on 11.5 or 12" rear wheels. I think ideal for the 12" is et22ish.

[HeyKC]

Have stock wheels with 315/30 lowered on H&R. Pretty sure I kept my 10 mil spacer too.

[bizzmeister]

Originally Posted by HeyKC

Have stock wheels with 315/30 lowered on H&R. Pretty sure I kept my 10 mil spacer too.

Nice, thanks for posting that.

How is the ride with the H&R springs ? Feel like stock?

[HeyKC]

Originally Posted by bizzmeister

Nice, thanks for posting that.

How is the ride with the H&R springs ? Feel like stock?

It handles better than it rides. It rides well enough but if I were to give my past self advice I would get the KW HAS kit.

[bizzmeister]

Originally Posted by HeyKC

It handles better than it rides. It rides well enough but if I were to give my past self advice I would get the KW HAS kit.

Hmm ok, just don’t want to be bouncing all over the place. The ride height is perfect with these springs IMO.

Of course KW would be amazing but we’re talking a couple hundred bucks for springs and 4K+ for a coilover setup. Had a set light years ago on my 06 Evo 9, KW Variant 3’s. Loved it but $$

[HeyKC]

Originally Posted by bizzmeister

Hmm ok, just don’t want to be bouncing all over the place. The ride height is perfect with these springs IMO.

Of course KW would be amazing but we’re talking a couple hundred bucks for springs and 4K+ for a coilover setup. Had a set light years ago on my 06 Evo 9, KW Variant 3’s. Loved it but $$

Yes I am a huge fan of the ride height. The KW HAS is a spring kit also. Usually closer to $1k. I also do not think i would go coil overs.