09-16-2022, 01:13 PM | #1 |
New Member
8
Rep 17
Posts |
F12/F13 Proper Staggering ??
Anyone have insight on proper staggering for the F12/F13 M6? I believe I currently have 20x9.5 up front and 20x10.5 in the rear. I want to go to a 20x11 in the rear but am not sure about the width up front. Seems like most people have gone with a 1" or 1.5" stagger from front to back. I would guess you probably don't want to go [I]more[I] than 1.5" ??
If this is covered in a existing forum and someone can point me in the direction that would help as well. After searching I could not find this specifically.
__________________
2015 M6 Coupe / VRSF Catless DP, BM3, M Sport Exhaust…. more to come
|
09-17-2022, 02:36 AM | #2 |
Lieutenant
149
Rep 477
Posts |
i have 9.5 front & 11.5 rear
__________________
|
Appreciate
0
|
09-17-2022, 01:23 PM | #3 |
The Dovahkiin
312
Rep 148
Posts |
__________________
Ed
CG Artist, Set Painter and Sci-Fi Nerd. “The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.” - Charles Bukowski |
Appreciate
0
|
09-17-2022, 04:06 PM | #4 |
Colonel
1316
Rep 2,350
Posts |
1 inch is 25.4mm and 1.5” is 38.1mm
The stock tyres are 30mm staggered front to rear. So my question isn’t actually just the wheels but about the tyres as well - are you planning on changing the rears only, perhaps to 305/30r20? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|