11-07-2020, 07:31 PM | #1 |
Captain
251
Rep 631
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
Ride height of F06 with competition package
I am about to order a Quickjack and noticed that the bottom of the front jacking point is only about 3.25 inches off the ground. At the rear it is about 4 inches. The wheel wells are R 27.5 and F 27.25. is this normal height? if not, what is "your" wheel well height.
Since NEW-TIS is off line I do not have access to those measurements.
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
11-08-2020, 04:29 AM | #2 |
Stupendous Man
60
Rep 354
Posts |
I have a lowered F13 (with comp pkg) on the KW HAS kit and recently purchased a Quickjack BL-5000EXT. Everything works fine, even lowered. The standard BL-5000 is not long enough for the F13, I had to go with the EXT version.
__________________
2022 BMW x30i Premium
2016 BMW M6 Coupe Comp Pkg. 2003 BMW M5 ~ Twin Turbo LS swap (SOLD) Last edited by timmay77; 11-08-2020 at 09:06 AM.. |
Appreciate
1
MMMM6GC275.00 |
11-08-2020, 09:21 AM | #3 |
Captain
251
Rep 631
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
I intend to get the BL 5000EXT, but was concerned about the statement in the operating instruction that say you cant start the lift from "flat" list position. I am the second owner and was wondering whether the ride height was the normal height or whether the springs have been changed. (i guess I can jack it up and have a look for markings on the springs)
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Appreciate
0
|
11-08-2020, 12:19 PM | #4 | |
Stupendous Man
60
Rep 354
Posts |
Quote:
__________________
2022 BMW x30i Premium
2016 BMW M6 Coupe Comp Pkg. 2003 BMW M5 ~ Twin Turbo LS swap (SOLD) |
|
Appreciate
0
|
11-08-2020, 10:17 PM | #5 |
Lieutenant
342
Rep 432
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|