07-18-2020, 04:16 AM | #1 |
Colonel
1310
Rep 2,349
Posts |
Different camber setting for Japan spec M6
I found this quite interesting, everything is the same apart from the front negative camber is 48 minutes more in Japan than other countries.
https://www.newtis.info/tisv2/a/en/f...ent/1VnYQ7UiJd https://www.newtis.info/tisv2/a/en/f...ent/1VnYPBibVi While these links are for F13 it is the same in the F06 and F12 as well.
__________________
SCOTT26 "So as an admirer of the M5 and a potential customer of an M5 Touring. I would run naked around the streets of Garching if they were to offer one."
|
07-18-2020, 04:19 AM | #2 |
Colonel
1310
Rep 2,349
Posts |
Even more interesting, there is no difference with M6 for Comp or non-Comp, but for the F10 M5 the Comp gets the Japanese front camber setting.
https://www.newtis.info/tisv2/a/en/f...ement/HPJBnehg https://www.newtis.info/tisv2/a/en/f...ent/1VnYaP7kCr
__________________
SCOTT26 "So as an admirer of the M5 and a potential customer of an M5 Touring. I would run naked around the streets of Garching if they were to offer one."
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|