Coding Question

[Cincinnatus]

I used Carly to add the Torque/HP and Sport Mode displays to my F13, but for some reason they're not active. No dial pointers on the Torque/HP screen (though the range circles are displayed) and nothing is selectable in the "SPORT Mode". Is there something I yet need to do, or perhaps I applied settings in the wrong order?

Any help would be appreciated.

[jackliu0527]

Not sure about carly, but if you code via e-sys here are the parameters

Enable Sports Displays
HU CIC
3000>EFF_DYN_SPORT_CID set to: aktiv
3000>EFF_DYN_SPORT_UNIT set to: aktiv

KOMBI
3008>DREHMOMENT set to: lb_ft (displays ft lb)
3008>LEISTUNG set to: ps (displays hp)

[Mnite_S63]

I thought CIC 2012/2013 models does not support sport gauge?

Thanks

[jackliu0527]

Originally Posted by Mnite_S63

I thought CIC 2012/2013 models does not support sport gauge?

Thanks

Works on my 650 running CIC

[bleunetizen]

I had that same problem in my '12 M6, ended up taking it off because I didn't want a non functioning option enabled.. keen to get it to work though!