10-30-2020, 03:54 PM | #2 |
Captain
221
Rep 738
Posts |
I was considering the same thing. The limiting factor with a stock setup is the front suspension piece in the attached picture. You can see with a stock 19 tire you have about 3/4 of an inch of clearance. I believe the 45 aspect tire is about 1/2 an inch larger in diameter. To me, I felt that that would not allow enough clearance, under road conditions for me to be comfortable with so I decided to just keep the standard tire size. But I did change to a non-runflat and that made all the difference in the world.
|
Appreciate
0
|
10-30-2020, 06:12 PM | #3 | |
Post Advisor
1631
Rep 1,692
Posts |
Quote:
https://www.6post.com/forums/showthread.php?t=1721995 |
|
Appreciate
0
|
10-31-2020, 01:56 PM | #4 |
Post Advisor
1631
Rep 1,692
Posts |
Quote:
|
Appreciate
0
|
10-31-2020, 08:24 PM | #6 | |
Captain
221
Rep 738
Posts |
Quote:
Just went to TireRack to see what the actual differences were: 40 Series = 26.7 in Dia 45 Series = 27.7 in Dia So it's 1/2 inch in radius which gives ~ 1/4 inch clearance. At the time I didn't want to be the guinea pig to see if would work. Even still probably too close for me. |
|
Appreciate
0
|
10-31-2020, 08:54 PM | #7 | |
Post Advisor
1631
Rep 1,692
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|