|
|||||||
Post Reply |
|
|
Thread Tools | Search this Thread |
| 09-23-2019, 03:51 PM | #1 |
|
Lieutenant General
 
2306
Rep 12,654
Posts |
AutoTalent | Dinan exhaust+intakes+roll bar set+tuner for Bmw F12 M6 2012-2018
 Dinan Free Flow Stainless Exhaust To order exhaust with black tips please visit our website by clicking HERE To order exhaust with polished tips please visit our website by clicking HERE Every Dinan product comes with our industry exclusive factory matching new car bumper to bumper warranty and is designed and tested in Morgan Hill, California and can be purchased and installed at any Dinan Approved BMW dealership nationwide. Features + Improve performance by 8 horsepower + Throaty, deeper sound + 100% 304 Stainless Steel Construction + Helmholtz chamber to remove drone + Incorporated Butterfly Valve technology + Simple installation using high quality BMW clamps and hangers + Quad 3.5" laser engraved black ceramic coated exhaust tips with Dinan logo + "Straight through" canister design  ---------------------------------------------------- Dinan Carbon Fiber Cold Air Intake To order please visit our website by clicking HERE The F12/13 M6 Cold Air intake is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles. The F12/13 M6 Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The F06/12/13 M6 cold air intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a 77% larger capacity. Features + Maximum peak power of 693 HP and 651 lb-ft of Torque utilizing Dinan Stage 2 components (DINANTRONICS™ Performance Tuner, intake and exhaust). A difference of 13 HP and 7 lb-ft of torque from Dinan Stage 1 (D-TRONICS Performance Tuner Only). + Dinan proprietary Injection molded Dinan MAF housings are larger than stock + Stock air filters are replaced with 77% larger Dinan conical air filters. + Entire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized. + Stock System Stays Completely Functional + Carbon fiber air box lids and intake ducts + Raised Dinan logos are laminated into the carbon fiber intake + Rubber hoses, mounting brackets, & hardware included   ---------------------------------------------------- Dinan Lightweight Tubular Adjustable Anti-roll Bar Set To order please visit our website by clicking HERE Dinan tuned anti-roll bar is built and tuned specifically for each BMW chassis. Lowering the amount of body roll keeps your BMW more level than stock to improve mechanical grip, while still allowing just enough body roll. This improvement gives the driver a much more planted and confident feeling in every corner. This Lightweight Tubular Adjustable Front Anti-Roll Bar may be added to the Stage 1 Suspension System for those who wish to build their high performance suspension in phases. Features Less Body Roll More Mechanical Grip More Stable At Limit Large 28mm size (stock bar is 24.5mm) 2 hole bar with 3 possible positions on bar & adjustable length end links Lightweight – 44% lighter than a solid anti-roll bar of comparable stiffness Large 22mm size (stock bar is 21.5mm) 3 hole bar with 3 possible positions on bar Lightweight – 29% lighter than a solid anti-roll bar of comparable stiffness  ---------------------------------------------------- Dinantronics Performance Tuner To order Stage 1 please visit our website by clicking HERE To order Stage 1 CP please visit our website by clicking HERE To order Stsge 2 please visit our website by clicking HERE To order Stsge 2 CP please visit our website by clicking HERE The DINANTRONICS Performance Tuner currently only works with vehicles equipped with mechanical wastegates. Vehicles with a production date of 07/2016 and newer MAY have a electronic wastegate and will not work with the DINANTRONICS Performance Tuner. Only a visual identification is 100% accurate. Please consult the wastegate identification guide HERE to accurately identify what is on the vehicle.    How to Place Your Order: Phone Domestic: (855) 973-2757 X 104 Phone International: (310) 231-7800 X 104 E-mail: online@autotalent.com Website: www.AutoTalent.com Payment:  Installations: Feel free to visit us at our facility in Los Angeles, CA. We install everything we sell. 19143 S. Hamilton Ave Gardena, CA 90248  Shipping: All orders are shipped via FedEx, UPS, USPS and Pilot. International, Hawaii and Alaska customers: Please contact us for the best quote possible. Hours of Operation: Monday through Friday: 10AM-7PM Pacific Time Saturday: By appointment only Last edited by AutoTalent; 09-27-2019 at 12:01 PM.. |
Post Reply |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
|
|
All times are GMT -5. The time now is 05:30 PM.