Silver stone interior

SpencerMH · 01-27-2019, 01:29 PM

Hello, I take meticulous care of my interior, always cleaning using good quality products anytime I think something may have rubbed off but the drivers seat is starting to show significant wear and it appears more the leather is cracking or wearing vs color transferring onto it.

Wondering if there are any leather paints that I could use to touch up, will be tough to spray on the bolster with the stitching but I think that's only solution long term as it's wearing?

Havy · 01-27-2019, 03:48 PM

Have a look at Colourlock apparently it is a good product. I have Silverstone II and will use it as soon it is little warmer.

SpencerMH · 01-27-2019, 04:43 PM

Quote:

Originally Posted by Havy

Have a look at Colourlock apparently it is a good product. I have Silverstone II and will use it as soon it is little warmer.

Just ordered in silver stone II, I'll add some pictures afterwards. Thank you!

RagtagXMASTER · 01-27-2019, 08:23 PM

i purchased the same kit but have not applied it yet. let us know how you do the area near the stitching, i am nervous i will ruin the black stitches. best of luck with the repair

FBMWWINS · 01-28-2019, 05:34 AM

Quote:

Originally Posted by Havy

Have a look at Colourlock apparently it is a good product. I have Silverstone II and will use it as soon it is little warmer.

Hi Havy,

do you know which product from them is best to get in order to remove light stains from colored clothes (red from sweatshirt and light blue from jeans) which are affecting my driver's seat? My interior is "Extended Nappa Elfenbein Weiss" - pretty DELICATE for these sort of things.

Taheemr · 01-28-2019, 06:31 AM

This is why i opted for black, i fear that the longevity of silver -stone will not be great

RagtagXMASTER · 01-28-2019, 08:09 AM

Quote:

Originally Posted by F06WINS

Hi Havy,

do you know which product from them is best to get in order to remove light stains from colored clothes (red from sweatshirt and light blue from jeans) which are affecting my driver's seat? My interior is "Extended Nappa Elfenbein Weiss" - pretty DELICATE for these sort of things.

they sell a kit, https://www.colourlock.com/colourloc...r-kit-dye.html I would say since your wear is mild at best, the mild cleaner will do a good job, I sent them pictures of my wear and they told me this kit with the mild cleaner would be perfect, again just too nervous to do it myself.

FBMWWINS · 01-28-2019, 08:11 AM

Yes Rag thanks for the suggestion. Mine is only slightly stained - for the rest leather is not worn at all but rather in top condition. Hope I will be able to remove those light but visible stains.

BadSeed · 01-28-2019, 10:30 AM

I use touch up paint brush\dabber near the contrast stitching.

https://www.amazon.com/ATLIN-Disposa...0T883TA90WQ0T7

https://www.amazon.com/ATLIN-Disposa...0T883TA90WQ0T7

Leather repair

castlesteve · 02-01-2019, 11:04 PM

I have silverstone and had to get the colourlock as well. Airbrushed it on... and it has held very well... like new actually. It's hard to deal with the black stitching though.

Bilbofraggins · 02-05-2019, 09:04 PM

I find it’s best to just not sit on it...

BM dnobagaV · 02-06-2019, 03:08 AM

Looks great. Ridiculously impractical as a color.

Bilbofraggins · 02-06-2019, 04:02 AM

My drivers seat bolster (door side) is showing a bit of wear... minor. The rest of the vehicle is as new...a 2013 X6M...

Currently looking at 2014-16 M6 Cabrio’s but I won’t be Getting Silverstone again...

SpencerMH · 02-20-2019, 08:38 AM

Been a bit busy so haven't done a good job of the repairs but started and the color lock works pretty well. This is good from a few feet, need to sand and really do it but certainly a huge step forward

RagtagXMASTER · 02-20-2019, 12:19 PM

Quote:

Originally Posted by SpencerMH

Been a bit busy so haven't done a good job of the repairs but started and the color lock works pretty well. This is good from a few feet, need to sand and really do it but certainly a huge step forward

How did you do so well near the stitching!? starting to look good for a quick attempt.

SpencerMH · 02-26-2019, 07:35 PM

Quote:

Originally Posted by RagtagXMASTER

Quote:

Originally Posted by SpencerMH

Been a bit busy so haven't done a good job of the repairs but started and the color lock works pretty well. This is good from a few feet, need to sand and really do it but certainly a huge step forward

How did you do so well near the stitching!? starting to look good for a quick attempt.

I used a q tip and was very careful. Also since I was aiming at prelim job I didn't focus too much on complete cover or uniformity so didn't get to close to the stitching. Didn't use tape or anything. I did order the micro brushes recommended above and going to do anothe cost this weekend and I'll post

01-27-2019, 01:29 PM	#1
SpencerMH First Lieutenant 68 Rep 397 Posts Drives: 1M, M6 GC, 718GT4, F355GTS6 Join Date: Dec 2010 Location: Ft. Lauderdale Fl iTrader: (3)	Silver stone interior Hello, I take meticulous care of my interior, always cleaning using good quality products anytime I think something may have rubbed off but the drivers seat is starting to show significant wear and it appears more the leather is cracking or wearing vs color transferring onto it. Wondering if there are any leather paints that I could use to touch up, will be tough to spray on the bolster with the stitching but I think that's only solution long term as it's wearing? Attached Images __________________ BSM 1M, MCS Coilovers, Pure Stg 2 Turbos, Walbro LPFP, JB4, BMS E85 Flash, ECS CF sealed intake, N54 Tuning DP's, Evolve Race Exhaust, Wagner FMIC, Stett CP w/ Tial BOV, ST BBK, Big Tires. M6 6MT Gran Coupe w JB4, 718 GTS, Lotus Esprit V8TT, Duc 998SBayliss
	Appreciate 0 Tweet Quote

01-27-2019, 03:48 PM	#2
Havy Captain 303 Rep 709 Posts Drives: BMW X5 M50i Join Date: Sep 2018 Location: Europe iTrader: (0)	Have a look at Colourlock apparently it is a good product. I have Silverstone II and will use it as soon it is little warmer.
	Appreciate 1 SpencerMH68.00 Quote

01-27-2019, 08:23 PM	#4
RagtagXMASTER First Lieutenant 119 Rep 318 Posts Drives: 2013 M6 Join Date: Jul 2018 Location: Boston MA iTrader: (0)	i purchased the same kit but have not applied it yet. let us know how you do the area near the stitching, i am nervous i will ruin the black stitches. best of luck with the repair
	Appreciate 0 Quote

01-28-2019, 06:31 AM	#6
Taheemr Captain 280 Rep 731 Posts Drives: M6 GC Join Date: Nov 2011 Location: Mids iTrader: (0)	This is why i opted for black, i fear that the longevity of silver -stone will not be great
	Appreciate 0 Quote

01-28-2019, 08:11 AM	#8
FBMWWINS Captain 604 Rep 909 Posts Drives: M8C Coupé & M240i Coupé Join Date: Nov 2011 Location: Europe iTrader: (0)	Yes Rag thanks for the suggestion. Mine is only slightly stained - for the rest leather is not worn at all but rather in top condition. Hope I will be able to remove those light but visible stains.
	Appreciate 0 Quote

01-28-2019, 10:30 AM	#9
BadSeed Second Lieutenant 158 Rep 269 Posts Drives: ///M6 GC Join Date: May 2015 Location: OC \| CA iTrader: (0) Garage List 2015 BMW M6 [0.00] 2010 BMW M5 [10.00]	I use touch up paint brush\dabber near the contrast stitching. https://www.amazon.com/ATLIN-Disposa...0T883TA90WQ0T7 https://www.amazon.com/ATLIN-Disposa...0T883TA90WQ0T7 Leather repair __________________
	Appreciate 1 Havy303.00 Quote

02-01-2019, 11:04 PM	#10
castlesteve Private 28 Rep 95 Posts Drives: 2014 M6 Coupe, 2017 X5M Join Date: Mar 2018 Location: Lexington, KY iTrader: (0)	I have silverstone and had to get the colourlock as well. Airbrushed it on... and it has held very well... like new actually. It's hard to deal with the black stitching though. __________________ 2014 M6 Coupe (SG/Silverstone) 2017 X5M (LBBlue/Aragon) 2000 Z3M Roadster (EstB/Black)
	Appreciate 0 Quote

02-05-2019, 09:04 PM	#11
Bilbofraggins Captain 283 Rep 906 Posts Drives: 2013 X6M, 2019 X3 M40I Join Date: Feb 2016 Location: North of the Wall iTrader: (0)	I find it’s best to just not sit on it...
	Appreciate 0 Quote

02-06-2019, 03:08 AM	#12
BM dnobagaV Banned 433 Rep 459 Posts Drives: 2010 BMW 528i Join Date: Apr 2018 Location: Dreamville iTrader: (0)	Looks great. Ridiculously impractical as a color.
	Appreciate 0 Quote

02-06-2019, 04:02 AM	#13
Bilbofraggins Captain 283 Rep 906 Posts Drives: 2013 X6M, 2019 X3 M40I Join Date: Feb 2016 Location: North of the Wall iTrader: (0)	My drivers seat bolster (door side) is showing a bit of wear... minor. The rest of the vehicle is as new...a 2013 X6M... Currently looking at 2014-16 M6 Cabrio’s but I won’t be Getting Silverstone again...
	Appreciate 0 Quote

02-20-2019, 08:38 AM	#14
SpencerMH First Lieutenant 68 Rep 397 Posts Drives: 1M, M6 GC, 718GT4, F355GTS6 Join Date: Dec 2010 Location: Ft. Lauderdale Fl iTrader: (3)	Been a bit busy so haven't done a good job of the repairs but started and the color lock works pretty well. This is good from a few feet, need to sand and really do it but certainly a huge step forward Attached Images __________________ BSM 1M, MCS Coilovers, Pure Stg 2 Turbos, Walbro LPFP, JB4, BMS E85 Flash, ECS CF sealed intake, N54 Tuning DP's, Evolve Race Exhaust, Wagner FMIC, Stett CP w/ Tial BOV, ST BBK, Big Tires. M6 6MT Gran Coupe w JB4, 718 GTS, Lotus Esprit V8TT, Duc 998SBayliss
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search