08-09-2018, 06:40 PM | #1 |
Captain
251
Rep 628
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
Seat retract coding
Will this seat retract work on a 2014 F06 ?
FDL Coding: SM2 -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV SM2 -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 28 SM2-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 3C Found this in the F80 section. Would love to have that capability. Thanks
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
08-10-2018, 07:33 AM | #3 |
Captain
251
Rep 628
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
This is what was postulated in the F80 forum section. The feature is not enabled on my M6 but I would love to have it.
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Appreciate
0
|
08-11-2018, 01:26 PM | #4 | |
Second Lieutenant
158
Rep 269
Posts
Drives: ///M6 GC
Join Date: May 2015
Location: OC | CA
|
Quote:
Setting below moved the seat 4CM (28 HEX). No leg space setting for the rear passenger (00 HEX) SM(6E) module = Passenger side (didn't try this) SM(6D) module = Driver side 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV / Werte=03 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = UNKNOWN / Werte=00, 28 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = UNKNOWN /Werte=00, 00 Didn't record a video but this is what it does: https://www.youtube.com/watch?v=V3ecvK-3qjs |
|
Appreciate
0
|
08-11-2018, 08:33 PM | #5 |
Captain
251
Rep 628
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
thanks a lot. I will give it a go.
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|