NEED HELP: F06 GC Front Wheel Fitment

Karter_Brazy · 10-20-2018, 12:55 AM

Hey fellas. I did some research in here but no luck. Anyways, my question is that do you guys think that (20x9.5 +38 wrapped on 255/35 tire) would fit in the front of F06 GC RWD without any issues especially from hitting the front struts. Anyone running 9.5 in the front, please chime in. Thank you.

Note: Msport package stock height.

Havy · 10-20-2018, 02:20 PM

I don’t know the OEM fitment but you get 15mm spacer on it. If you new wheels are the same than it should be ok.

brad850csi · 10-23-2018, 03:22 PM

The stock wheels are 33mm offset so these wheels are actually 5mm further in, plus another 5mm from the 10mm wider tyre. You might have rubbing on the inside edge.

A 12-15mm spacer might be needed to line up the outer edge of the tyre with the arch and that'll give you more than stock clearance on the inside too.

10-20-2018, 12:55 AM	#1
Karter_Brazy Eurosteps 53 Rep 128 Posts Drives: BMW F06 / MB W212 / BMW F48 Join Date: Oct 2018 Location: Los Angeles iTrader: (1)	NEED HELP: F06 GC Front Wheel Fitment Hey fellas. I did some research in here but no luck. Anyways, my question is that do you guys think that (20x9.5 +38 wrapped on 255/35 tire) would fit in the front of F06 GC RWD without any issues especially from hitting the front struts. Anyone running 9.5 in the front, please chime in. Thank you. Note: Msport package stock height. Last edited by Karter_Brazy; 10-20-2018 at 10:51 PM..
	Appreciate 0 Tweet Quote

10-20-2018, 02:20 PM	#2
Havy Captain 303 Rep 709 Posts Drives: BMW X5 M50i Join Date: Sep 2018 Location: Europe iTrader: (0)	I don’t know the OEM fitment but you get 15mm spacer on it. If you new wheels are the same than it should be ok.
	Appreciate 0 Quote

10-23-2018, 03:22 PM	#3
brad850csi Colonel 1316 Rep 2,349 Posts Drives: 16 F13 M6 Comp Join Date: Jan 2015 Location: Auckland, New Zealand iTrader: (0)	The stock wheels are 33mm offset so these wheels are actually 5mm further in, plus another 5mm from the 10mm wider tyre. You might have rubbing on the inside edge. A 12-15mm spacer might be needed to line up the outer edge of the tyre with the arch and that'll give you more than stock clearance on the inside too.
	Appreciate 1 Havy303.00 Quote