07-16-2021, 12:37 PM | #1 |
Captain
156
Rep 659
Posts |
Oil pan removal, can this be done in situe?
As above can removing the oil pan be done with the engine in, without removing subframe etc..?
Thanks
__________________
Current: 2017 M6 Gran Coupe
Previous:2014 640D GC 383BHP + 733NM, F10 2010 530d 520i (2000), E36 comact 318i, E46 M3, E46 318Ci, X5, Non BMW: 5x Skyline / GTRs, 5x Supras, 2x Nissan 200sx s14a, lots of other stuff |
07-16-2021, 12:44 PM | #2 |
Captain
252
Rep 631
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
Yes:
Necessary preliminary work: Drain off engine oil Lower front axle Remove lower oil sump section Remove oil pump. Release supply/return lines on oil filter Release holders of supply/return lines on oil sump Detach plug from oil pressure switch Unclip wiring harness on oil sump
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Appreciate
1
Mdriv3r148.50 |
07-16-2021, 04:49 PM | #4 |
Captain
252
Rep 631
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
See if this helps. You can also look at REALOEM dot COM.
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination Last edited by arucano; 07-16-2021 at 04:55 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|