06-12-2021, 04:56 PM | #1 |
Second Lieutenant
78
Rep 281
Posts |
Windshield Replacement
I just had my windshield replaced with OEM. I noticed this morning the driver side wiper does not go as far to the left as before. The wiper almost met the pillar, now there is a gap of 2-3 inches. Any idea what may have caused this and if there is a way to adjust? I did put the wipers straight up to maintenance position and without really trying I could pull the wiper almost tight to the pillar but it returned to original position on restart.
|
06-12-2021, 05:10 PM | #2 |
Captain
251
Rep 631
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
Was the wiper arm removed at all during the replacement process? If so, it might not have been indexed correctly to the shaft.
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Appreciate
0
|
06-12-2021, 07:01 PM | #3 |
Colonel
1195
Rep 2,906
Posts |
^ This. The shaft is finely knurled so the arm can be put back on in many positions. Sounds like they put it back in a different position. It is probably also in a different position at rest.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|