2018 What Did You Do To Your 6-Series Today?

[E92TTCoupe]

Originally Posted by sixfiftyay

looks good. how's it sound?

i've been postponing getting a stereo installed and it's getting annoying. the stock stereo in this car is really lacking imo.

I couldn’t wait so I just throw it in there lol but it’s amazing! Definitely was missing that bass and the good thing it doesn’t rattle the trunk or anything. I missed it and I’m definitely happy to have it back. Don’t wait long you’ll wish you did it sooner lol and plus Technic PnP made it that much simple.

[vaio23]

Originally Posted by E92TTCoupe

I couldn’t wait so I just throw it in there lol but it’s amazing! Definitely was missing that bass and the good thing it doesn’t rattle the trunk or anything. I missed it and I’m definitely happy to have it back. Don’t wait long you’ll wish you did it sooner lol and plus Technic PnP made it that much simple.

I did the same thing adding sub and amp but went with a small 6" JL micro sub in small enclosure behind the drivers seat in my coupe (Rear seat footwell). I get great bass now, I had upgraded to BavSound underseat subs and barely noticed a difference, now it is substantial.

[jjasonSU]

Originally Posted by vaio23

I did the same thing adding sub and amp but went with a small 6" JL micro sub in small enclosure behind the drivers seat in my coupe (Rear seat footwell). I get great bass now, I had upgraded to BavSound underseat subs and barely noticed a difference, now it is substantial.

Is this a custom enclosure? any photos?

[vaio23]

Originally Posted by jjasonSU

Is this a custom enclosure? any photos?

Nope just a standard preloaded JL sub. JL Audio CP106LG-W3v3. Fits perfectly behind my drivers side seat in the rear floor board.

[NorthCountryGuy]

Replaced plugs & coils. Bosch & Bosch.

[E92TTCoupe]

.

[NorthCountryGuy]

Replaced crankshaft sensor.

[F06msportmia]

Added an additional 100 HP! LMAO

[E92TTCoupe]

Got her wrap up!

[ACMEGarage]

Just brought her home today.
Ordering a set of rubber floor mats in case of inclement weather, etc..

Still learning the ropes on this awesome car. Ordered a new owner's manual and trying to get a firm understanding of all the features, options and controls.

Where are the rear cup holders

Mike

[Qsilver7]

Originally Posted by ACMEGarage

Just brought her home today.
Ordering a set of rubber floor mats in case of inclement weather, etc..

Still learning the ropes on this awesome car. Ordered a new owner's manual and trying to get a firm understanding of all the features, options and controls.

Where are the rear cup holders

Mike

Congrats...I'm assuming you have the M6 GC (f06 not the f13)...if I'm correct...the rear cup holders are incorporated into the rear armrest (at least on my regular f06 GC).

Here's a link to a PDF (downloadable version) of the 2014 M6 GC owners manual. You can save it to the device/CPU of your choice so that you can always have the manual handy.

https://carmanuals2.com/bmw/m6-gran-...s-manual-55262

[Bigjule1111]

small mod

[jjasonSU]

Dropped off at body shop today. Guy who hit & Run denied it was him. So finally got a formal denial form his insurance....
Hope everything goes well. They have great reviews.

[NorthCountryGuy]

Replaced the center under panel of the car. I never knew a piece was there till I was looking at something else on real.oem etc... I thought maybe because the exhaust pipes were there, they excluded covering the area. The center piece basically only covers the center, and leaves the pipes exposed.
Now that I have the Prince back, we’re going for a cruise.

[iamvanja]

For anyone who replaced their lower bumper diffusers with an M6 style ones, what did you go with? Anyone has fitment experience with this one? https://www.ebmotor.com/product/rear...-2012up-b203f/

[NorthCountryGuy]

Nothing for the car, but to the car.
Had to pick up something from 350 miles away. Took the 650 for I wanted to put him through the paces after the recent electrical DME signaling debacle, and give his injectors a good exercise.
Very assertive drive on the 79 in PA. Those folk drive fast down there. Not aggressive like the Mass Pike. Just fast. Topography of the 79 suited it. Flat unobstructed medians and cleared right shoulders. I did not see a single patrol for over 100 miles. My radar did not sound once for a patrol. I was at 80 in the RIGHT lane and minivans, Kias, Mustangs, etc were passing at 90-100. When I got back to NYS Thruway cruise control at 72 seemed very slow.

14 hours without engine off and assertive driving, and not a hiccup.
The Prince had done well.

[iamvanja]

Bath and M6 mufflers with bumper valance and lower center diffuser. Super excited!
Edit: also badge delete

[Bigjule1111]

Looks good bro ... Can the tips go in a lil further ,? That's my next mod but would like them tucked in a lil bit

[Keysersoze819]

Originally Posted by board57796

I thought it would be fun to start a thread like this that is going on an E38 forum I'm a part of. People use it to just post little things they did with their cars that day/week that they might want to share but not start a whole new thread for! Washed it? Drove it? Bought it? Did a little mod? Stuff like that. Hopefully that's OK?

I'll start:

Got mine back from the dealer for a HPFP replacement (thank God for warranty) and then went to a Sonic car meet up!

[img]https://farm2.staticflickr.com/1841/...af4b1414_c.jpg[/img]

Lowered on H&R

[iamvanja]

Originally Posted by Bigjule1111

Looks good bro ... Can the tips go in a lil further ,? That's my next mod but would like them tucked in a lil bit

I go back and forth on this. They look like they are sticking out too much to me, but at the same time they are flush with the bumper so everything is good.

[Bigjule1111]

Oh k. So u have the option to go in some more ? Reason I'm asking i was going to purchase a set from someone and they stuck out too much and they couldn't go in any more

[iamvanja]

I would still like them to go in just a little bit, maybe half an inch or an inch.
But I don't know if they are adjustable. I was going to adjust them, but there is no screw or anything. Thinking maybe they are just forced pushed in?