12-11-2018, 12:22 PM | #1 |
iMAD HN
3
Rep 6
Posts |
Gents,
My F06 has M-Performance by Akrapovic, VRSF Catless downpipes and ESS stage 2 tune. Car is running daily use and with no issues at all. Recently i tried replacing the OEM filters with the BMC. 2 days after, I floored the car and suddenly at speed 220km/h rpm +6k I got sudden cut in power and drivetrain message. Switched off/on the car and the drive train disappeared and car went back to its regular performance. Again after 2 days i got the same drivetrain message at exactly same speed and high rpm. Car now is running perfectly fine at all rpms. The moment i reach 220 it cutts off. Any reason for that? I returned back the OEM thinking might be because of the BMC |
01-14-2019, 02:13 AM | #3 | |
Drift Instructor @ BMW Club UAE
312
Rep 433
Posts
Drives: BMW F10 M5
Join Date: Apr 2015
Location: United Arab Emirates
|
Quote:
It only happens on your aggressive file right?
__________________
F10 M5 - AlpineWhite/SakhirOrange[DCT](Current)
F16 X6 - SparklingStorm/CognacBlack (Current) Follow me on Instagram (Click) |
|
Appreciate
0
|
01-14-2019, 02:22 AM | #4 | |
iMAD HN
3
Rep 6
Posts |
Quote:
This is only on aggressive file. Diagnose report showing many errors, the following: Fault Code: 11A102 Fault Explanation: :High-pressure fuel 2, plausibility: Pressure too low Fault Code: 482609 Fault Explanation: :SBS function - longitudinal acceleration sensor - fault tolerance signal Fault Code: 480134 Fault Explanation: :SBS function - direction unsure vx greater than 2 m / s Fault Code: D01646 Fault Explanation: :Message error (accelerator pedal angle, ID: ANG ACPD) - Timeout / Message error (accelerator pedal angle, ID: ANG ACPD) Channel: DME / DDE - Timeout Fault Code: D017A3 Fault Explanation: :Signal fault (actual number of encoder wheel flanks, ID: AVL QUAN EES WHL) - Invalid / Error signal (actual number of encoder wheel flanks, ID: AVL QUAN EES WHL) Channel: DSC Module - Invalid Fault Code: D017C5 Fault Explanation: :Error signal (actual speed wheel, ID: AVL RPM WHL) Channel: DSC Module - Invalid / Signal fault (actual speed wheel ID: AVL RPM WHL) - Invalid Fault Code: D018E1 Fault Explanation: :Message error (torque crankshaft 1, ID: TORQ CRSH 1) Channel: DME / DDE - Timeout / Message error (torque crankshaft 1, ID: TORQ CRSH 1) - Timeout Fault Code: D01557 Fault Explanation: :Message error (wheel torque drive 1, ID: WMOM DRV 1) - Timeout / Message error (wheel torque drive 1, ID: WMOM DRV 1) Channel: DME / DDE - Timeout Fault Code: D01558 Fault Explanation: :Message error (wheel torque drive 2, ID: WMOM DRV 2) - Timeout / Message error (wheel torque drive 2, ID: WMOM DRV 2) Channel: DME / DDE - Timeout Fault Code: D0156D Fault Explanation: :Message error (wheel torque actuator 3, ID: WMOM DRV 3) - Timeout / Message error (wheel torque actuator 3, ID: WMOM DRV 3) Channel: DME / DDE - Timeout Fault Code: D01570 Fault Explanation: :Message error (wheel torque drive 4, ID: WMOM DRV 4) - Timeout / Message error (wheel torque drive 4, ID: WMOM DRV 4) Channel: DME / DDE - Timeout |
|
Appreciate
0
|
03-17-2024, 03:12 PM | #5 |
Major
373
Rep 1,297
Posts |
Same exact issue, but with a 640i and BM3 stage 1 tune. After cycle, car is fine. Usually happens in sport mode/aggressive driving.
Definitely noticed it after the tune. Should I contact BM3? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|