Custom Spring setups through Bimmerworld

[Mdriv3r]

Has anyone looked at the custom setups from bimmerworld?

On their site we can choose coilover springs and helper springs to make a good spring rate like KW HAS, expect it'd just be a setup to stiffen and lower the car.

It would be a 2 - piece setup (looks like HAS) with a coilover spring + helper spring.

Anyone have suggestions on spring rates and lengths? Also, if enough people have interest, we can do a group buy. I'm finding that assembling a setup will be around $700 -$800-ish. Also KW has their spring rates and lengths in their .pdf on their site.

Take a look and let's figure out some spring rates and setups?

I think that'd be great, as we only have one or two options for lowering. I came from a set of Ohlins on E92 M3 and they were great, people occasionally switched to swift springs for a stiffer setup. Just seeing what we can set up with this system.

So to be clear, I am seeing we as forum members can design a lowering kit... We can retain EDC and hopefully not ruin ride quality, have a good stance, and better grip etc...

I have also uploaded the KW parts approval for TUV and their install manual for V3. Their Spring rates and lengths are listed there.

Link for Bimmerworld Spring options (Length and Spring rate for Ocoilover Spring + Helper Spring):

https://www.bimmerworld.com/Suspensi...s/#/perpage:40