Quote:
Originally Posted by Luftpost
Quote:
Originally Posted by iamvanja
Do you mind showing how you did the wiring back to front? Is it through (inside) headliner or something else?
|
I do not have any photos, however, it is quite simple and doable. The cable that is included with the VIOFO 139 is a newer version for them. It is smaller in diameter than previous cameras. That helps a lot!
Since the front camera is mounted high up on the windshield, behind the rearview mirror, I routed the wire up, removed the two plastic trim pieces around the rear view mirror, tucked it in there, then in between the windshield and headliner to the driver side, down the pillar where the airbag lives, behind the rubber moulding in the door frame, along the door sill (tucked behind rubber) all the way to the back seat and again up the back door frame and into the headliner, then between the rear window and headliner, to the rear camera.
Hope that makes sense. If not, I can try and take some photos and post them.
L
|
If you could snap couple pics, I would greatly appreciate it!