Thread: M6 DIYs
View Single Post
      12-15-2017, 10:17 AM   #10
Flying Ace
Lieutenant General
Flying Ace's Avatar
4985
Rep
11,891
Posts

Drives: G05 45e, 997.1 & 991.1 GT3s
Join Date: Jul 2014
Location: SF, CA

iTrader: (5)

Quote:
Originally Posted by malcoll View Post
M6GC easy to disable. The module is located under a black plastic cover hanging under the package tray in the trunk, on the left side of the car. See first picture

Detach, then unplug harness, then hang module back from mounting location.
Second picture.
Just did the ASD removal from the GC this morning.

To remove the ASD box, there's a round hole on the underside of the box. Inside the hole is a tab, push it to driver side and it untabs. Then, slide the other 2 mounting tabs out.

To remove the ASD connector, on the top of the gray connector plug is a push button tab. Push it, and then slide the black switch over. The ASD module will fall right out.

I found it easier to remove the box with the rear seat folded down and inserting my torso into the trunk from the back seat.

Doing the connector, it's easier to come out of the car and approach it from the trunk.

Instead of mounting the box back in, I decided to take it out the car for weight savings bc racecar.

Last edited by Flying Ace; 12-16-2017 at 05:18 PM..
Appreciate 0