Quote:
Originally Posted by SoCalM6GC
You would have to buy the valves, probably right around $100 each and you would need 2 of them, then a muffler shop would have to cut the pipes and weld in the valves, then hook them up to your vacuum lines, then you would need the exhaust meister unit for another $140 or so to control the valves. Not a big deal cost wise but you just need to order the parts and have a decent muffler shop install them and run vacuum lines to the original lines.
|
Hmmmm... sounds like about $500 in parts, but a lot of work, and some risk - I always get nervous when vacuum lines are involved. I also wonder if there's a shop that can properly weld Titanium. Is there someone in the Northern NJ area you could recommend?