Quote:
Originally Posted by longnvu
Can you share the link to the exhaust tips?
|
Still out of stock so a product link doesn't exist.
Here is another company that sells exhaust tips. All carbon fiber though.
Black Straight cut:
https://xxiituning.com/collections/b...e-exhaust-tips
Steele Straight cut:
https://xxiituning.com/collections/b...e-exhaust-tips
Burnt|Blue Straight cut:
https://xxiituning.com/collections/b...e-exhaust-tips
Angle cut:
https://xxiituning.com/collections/b...29257528279104
Haven't purchased anything from them. Ask for
specific specs & post here if you want.
Specs:
Inner diameter of the inlet (this is very important to get right) - Ask for it in MM not inches. Should be 69MM to 70MM
I used a metric ruler instead of a caliper & mine was 68MM outer diameter. You can also see how the piping shrinks & curves (terrible design) so you can only push the tip back up to a certain point.
Length of the tips - this varies depending on how it clamps. This is also important so you don't end up with tips that stick out too much
Outer diameter - 101MM = 4". Mine is 89MM or 3.5". This becomes important on certain types of diffusers.