View Single Post
      06-22-2010, 09:15 AM   #50
Major General
SCOTT26's Avatar

Drives: Frozen Dark Red First Edition
Join Date: Jan 2007

iTrader: (0)

My post about this on GCF.

Reading some of the media today where one says it is not the M6 but the 650i? I will Point out incase they are reading.
First of all the 650i has already been spotted using the trapezoid exhaust ports on each side of the rear valence.

BMW and M cars test in phases , a single prototype whether a BMW or an M car is not two cars the same , prototypes are utilised by every department and depends on what car is scooped it will be focusing on the development aspects of that department.
Specifics such as fit and finish are not needed , aerodynamics will be tested additionally. That is why there is no M styling packet as yet and is using the conventional 6er aerodynamics.
Eventually once targets have been met, multiple prototypes become one at the FEP stages.

In would also like to point out. Why does BMW need to have an exact interpretation of the Audi R8? Can BMW not do it differently without journalists pointing out that it has to be a word for word , power for power facsimile?
With the E60 M5 and the E63 M6 , BMW felt that customers reckoned the two cars were to close for comfort.
Now there is an ongoing effort to distance the new M6 (F12/F13) from the new M5 (F10)in terms of dynamics and composure.

BMW can do an R8 rival in terms of Power and dynamics , it is more refreshing to see them do something that showcases BMW's originality and engineering prowness but is in noways a direct facsimile.

Official launch for the new M6 will be @ Geneva 2012, alongside the new 3er Sedan , exactly at Geneva 2005 where the E90 and E63 M6 first made their debut.

The new 6er and X3 begins a trend for more sharper lines in specific design details , elements such as more broad sculpture , sharper angles around the twin-kidney grille outline and angular headlights which will also be carried over to the new 3er Sedan.