Quote:
Originally Posted by ex46fanatic
Ive turned on the car wifi hotspot, all very well - but what can I even do with it? Would love to be able to cast youtube to idrive through bmw wifi.
Also coded start up emblem, tyre temperature, video in motion, video playback of other supported formats, going through modules slowly.
Below is what i have ready to code.
- Disable sound on disconnect SB – driver and pax
ACSM => 3000 => SPW_FA (or SBR_PreWarning_Fahrer) => nicht_aktiv
ACSM => 3000 => SPW_BF (or SBR_PreWarning_Beifahrer => nicht_aktiv
- Auto Start-Stop function to start as last used
CAS => 3000 => TC_MSA_MEMORY => aktiv
2014 LCI
Already incorporated
- Auto Start-Stop OFF by default
CAS => 3000 => TC_MSA_DEFAULT_OFF => aktiv
- Turn off power (radio and iDrive) when opening door
2011-12 (CIC)
CAS => 3000 => TC_LOGIC_KLR_OFF_DOOR => aktiv
2012-13 (NBT) and 2014 LCU
CAS => 3000 => TC_LOGIC_KLR_OFF_DOOR => aktiv
-LAUNCH CONTROL
EGS > 3000 > LC
-Display compass in instrument cluster (SEE ALSO hu_NBT)
KOMBI => FZG_AUSSTATTUNG => 3003 => KOMPASS_GRAPH_ENABLE => activ
KOMBI => FZG_AUSSTATTUNG => 3003 => KOMPASS_HIMMELSRICHTUG_ENABLE => activ (NOT NECESSARY FOR 2015 LCI 640i GC)
- Display digital speed in instrument cluster (bottom center in basic, bottom of Speedo in Extended and Multi-Function)
KOMBI => 3000 => BC_DIGITAL_V => aktiv
BC calculation with the speedometer curve - correction for analog / Head up display speed - disabling those corrections , you will be able to see the real speed. SEE YOUTUBE VIDEO
KOMBI 3000 Anzeige_Konfiguration BC_V_KORREKTUR => nicht_aktiv
- Enable Sports Display menu when switching to sport driving mode (check this)
KOMBI => 3000 => SPA_SPORT_ENABLE => aktiv
- Subtle orange lines at the bottom of Extended (6WA) or Multifunction (6WB) display during the day (2013 Default is grey)
KOMBI => 3000 => HINTERGRUND_FARBE_TAG => orange
- Subtle grey lines at the bottom of Extended (6WA) or Multifunction (6WB) display during the night (2013 Default is orange)
KOMBI => 3000 => HINTERGRUND_FARBE_NACHT => grau
- Subtle grey lines at the bottom of Extended (6WA) or Multifunction (6WB) always in day mode
KOMBI => 3007 => DIM_NACHT_EIN => Werte=FF
- Enable Pressure and Temperature Readings to the TPMS Screen
2011-12 (CIC)
HU_CIC => 3001 => RDC_SAFETY => aktiv
2012-13 (NBT) and 2014 LCI
HU_NBT => 3001 => RDC_SAFETY => aktiv
- Splash animation on the iDrive screen upon system load: Variant1 = M logo, Variant7 = White BMW logo, Variant8 = Brown bmw logo (same as
HU_CIC), Variant9 = Merry Xmas
2011-12 (CIC) (function not found)
2012-13 (NBT) and 2014 LCI
HU_NBT => 3001 => STARTUP_EMBLEM => variant_01 (default: _0)
- Enable DVD in motion
2011-12 (CIC)
HU_CIC => 3000 => SPEEDLOCK_X_KMH_MIN => value = FF
HU_CIC => 3000 => SPEEDLOCK_X_KMH_MAX => value = FF
HU_CIC => 3000 => VIDEO_NUR_MIT_HANDBREMSE => nicht_aktiv
2012-13 (NBT) and 2014 LCI
HU_NBT => 3000 => SPEEDLOCK_X_KMH_MIN => value = FF
HU_NBT => 3000 => SPEEDLOCK_X_KMH_MAX => value = FF
HU_NBT => 3000 => VIDEO_ HANDBRAKE => nicht_aktiv
- Enable video playback via USB Port and with various video formats
HU_NBT => 3003 => API_USB_VIDEO => both
HU_NBT => 3000 => ENT_CODEC_XVID => aktiv
HU_NBT => 3000 => ENT_CODEC_VCD => aktiv
(Will play any format (mpg, avi, mkv, divx . Also at HD Resolution)
- Show Compass on Idrive (SEE ALSO kombi)
HU_NBT => HMI => 3000 => X_VIEW => aktiv
HU_NBT => HMI => 3001 => X_VIEW_GRAPHIC_SLOP => trajectory1
HU_NBT => HMI => 3002 => X_VIEW_GRAPHIC_ROLL => trajectory1
HU_NBT => HMI => 3003 => COMPASS => aktiv
HU_NBT => HMI => 3000 => MOMENTDISTRIBUTION_MENU=> aktiv
HU_NBT => HMI => 3000 => GYRO_INTERN=> aktiv
-ENABLE WIFI HOTSPOT
HU_NBT > 3003 -> WLAN_STATUS -> aktiv
HU_NBT -> 3003 -> WLAN_MODUS -> ap
HU_NBT -> 3003 -> WLAN_SIGNAL_STRENGTH -> “incar” for low power, “outdoor” for high power
HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_COVERART -> aktiv
HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_VIDEO -> aktiv
HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP -> aktiv
You'll then need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this
- Halos full brightness even when headlights are on
FRM => 3060 => U_EFF_POL => wert_02__100%
- Opening doors will not interrupt window roll up (Front and Back)
FRM => 3030 => FH_TUER_AUF_STOP_MAUT => nicht_aktiv
for back - JBBF => 3070 => FH_TUERAUF_STOP_MAUT => nicht_aktiv
- Automatic High beam Assist Headlights (Car must have KAFAS camera which supports High Beam Assistant, Lane Departure Warning, and Speed Limit Information. Without this camera system installed, there is no KAFAS module)
2011-12 (CIC)
FRM => 3050 => FLA_VERBAUT => aktiv
FRM => 3050 => FLA_AUTO_AKTIV => automatisch
KAFAS2 => 3050 => FLA_ON_OFF => aktiv
HU_CIC => 3000 => HIGH_BEAM_ASSISTANT => aktiv
2012-13 (NBT) and 2014 LCI
FRM => 3050 => FLA_VERBAUT => aktiv
FRM => 3050 => FLA_AUTO_AKTIV => automatisch
KAFAS2 => 3050 => FLA_ON_OFF => aktiv
HU_NBT => 3000 => HIGH_BEAM_ASSISTANT => aktiv
|
Hi,
I have a 6wb dash and I coded the below in bimmercode but cannot see my speed when scrolling through the button on the stalk. Do you know if I'm missing anything else? I have the digital speed showing currently in the top by the needle in comfort mode but want it in the centre bottom instead where you see your mpg and average speed etc. Any ideas please?
- Display digital speed in instrument cluster (bottom center in basic, bottom of Speedo in Extended and Multi-Function)
KOMBI => 3000 => BC_DIGITAL_V => aktiv