View Single Post
      06-17-2019, 02:12 PM   #57
Second Lieutenant
BadSeed's Avatar

Drives: ///M6 GC
Join Date: May 2015
Location: OC | CA

iTrader: (0)

Garage List
2015 BMW M6  [0.00]
2010 BMW M5  [0.00]
Originally Posted by longnvu View Post
Can you share the link to the exhaust tips?
Still out of stock so a product link doesn't exist.

Here is another company that sells exhaust tips. All carbon fiber though.

Black Straight cut:
Steele Straight cut:
Burnt|Blue Straight cut:

Angle cut:

Haven't purchased anything from them. Ask for specific specs & post here if you want.

Inner diameter of the inlet (this is very important to get right) - Ask for it in MM not inches. Should be 69MM to 70MM

I used a metric ruler instead of a caliper & mine was 68MM outer diameter. You can also see how the piping shrinks & curves (terrible design) so you can only push the tip back up to a certain point.

Length of the tips - this varies depending on how it clamps. This is also important so you don't end up with tips that stick out too much

Outer diameter - 101MM = 4". Mine is 89MM or 3.5". This becomes important on certain types of diffusers.

Last edited by BadSeed; 06-28-2020 at 08:52 AM..