Quote:
Originally Posted by koqui79
Hi guys. I desperately need some help. So I'm selling my wheels off of my e60 m5 20x9 and 20x11 and I have a buyer in TX with an F13 640i that's interested but we are not sure about the fitment in the rear as my set up is pretty aggressive.
We've done the math based on width and offset but we are only 90% sure it could work. The best way is to do a test fit.
So I'm reaching out to our community to see if anyone with an F13 in the NJ/NYC area could help me out and let me do a test fit of my wheels on your car.
We can go to the shop of your choosing or take it to the shop I go to (Status Motoring in Ridgefiled NJ) to have the test fitment done.
For your trouble I'm willing to pay you $50
So who want to make an easy $50?! Send me a message or text 904-534-1819
|
I cant provide my car, but what I can tell you is compare the wheels you are selling him to M5 width and offsets. I have a 650xi GC and the stock m5 343M wheel is as aggressive as you can go in the rear. Anything more and it would poke. it is dead flush with stock Msport suspension. I cant spek to the inside clearances, but there is zero rubbing with M5 wheels and clearances.