|
If you know how much the drop is from KW specs say 1 inch for ex.measure around the car for the lowest heights.Measure the distance between the jack and the side skirts now when the jack is in place and deduct 1 inch , this will let you know how far down you can lower the car.
For the Carbon Fiber not scraping good luck , you know it’s going to be a gamble, you just have to be extra careful on what driveways you chose , and always enter a driveway on a sharp angle.
I rolled on 3 coats of Raptor liner (bed liner)under my front carbon lip so if I scrape I scrape on the liner, they also have that rubber that tapes on the lip but I feel it’s too thick and make it even lower
|