Quote:
Originally Posted by jwblack750
Quote:
Originally Posted by yipyip99
Rim Diameter: 20
Rim Width: 8.5-10
Section Width: 8.5 FRONT 10 REAR
Offset: LOW and HIGH
Bolt Pattern: 5-120, 5x112, 5x114.3
Hub Bore: 72.56 66.56 74.1
|
The offset is going to be a 2-digit number. Mine are 33 front and 44 rear. It will often have ET before the number. You would have needed to enter those numbers in the http://www.rimsntires.com/specspro.jsp site to see if the 10" wheel would cause any issues. The front wheel shouldn't be any problem.
|
Thank you so much for the info
I know the rims will clear without any problems.
My concern is the effects of having staggered wheels on an awd vehicle.
Would it kill the transmission or the drivetrain?
: