Old post, but worth updating. I ordered these, will let you all know how they work out
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
*****EDIT 1/13/19******
Just realized that you cannot adjust the angle of the Driven Products valve stem (in relationship to the sensor), like you can the HUF RDE017. My ADV1s require a steeper angle than I believe is stock (pulling the tires off this week off my 601Ms, so I'll know then).
Probably going to put the DPs on the stock wheels, and then order some new HUFs. The RDE017s that cam with the ADV1 will not work with my pre 3/14 build date unfortunately. Not sure that the sensor sticking up a bit is really going to be an issue - the interweb seems split - but going to play it safe and get the HUFs so that I know for sure I can get the sensors more flush with the barrel.
The RDE017 are for sale cheap BTW, since I have no use for them. I have three though, so another one would need to be bought.