Quote:
Originally Posted by Esthero
Hugo, I tested it when the car was stationary and both doors were open. And yet somehow I need to move the seat little bit from the side button before the easy entry button works.
|
I did some further reading through TIS and what you’re describing sounds like an intended function with a manual override. See below. What could be happening is that the seat module is wrongly assuming that the pre-end stop position has been reached thus requiring you to override using the main seat switch block.
ISTA diagnostics has a “seat adjustment normalisation” routine that is used to relearn the adjustment parameters, essentially restoring them to factory settings. Running this routine would be my first diagnostic step. If you don’t have the software you can ask your local BMW dealer or well-equipped indie shop to do it :-) It’s in the “body > safety function” group.