View Single Post
      06-15-2020, 03:47 AM   #21
M6Roar
Private
24
Rep
58
Posts

Drives: '14 M6GC
Join Date: Apr 2018
Location: Bahrain

iTrader: (0)

Quote:
Originally Posted by dmaxer View Post
New member here and a new '14 M6 owner. The M6 (only 6500 mi.) came with the complete CCB system. The squealing noise was extreme. I replaced the stock pads with Pagid pads (front: 4935 rear: 4932) on all four corners. The pads DID NOT have the Teflon shim installed like the OEM pads. So, there is a very tolerance difference between the two sets. The squealing is gone! However, there is now a rattle/chatter at low speeds when going over a bump. This rattle/chatter also occurs when changing direction going forward/reversing. The braking petal was super sensitive with the old pads and spongier with the Pagid pads. I'm in contact with a Pagid representative to figure out why I have rattle/chatter but I'm fairly positive it has everything to do with the extremely small dimensional disparity between the OEM and Pagid brake pads.

Is the issue resolved? I am planning to order mine.