View Single Post
      01-08-2020, 01:17 PM   #7
brad850csi
Colonel
1316
Rep
2,349
Posts

Drives: 16 F13 M6 Comp
Join Date: Jan 2015
Location: Auckland, New Zealand

iTrader: (0)

Quote:
Originally Posted by dyefremov View Post
Hi brad850csi! Are you on stock suspension? No fender rolling? Camber? I'm very interested in your experience because I couldn't find too many examples of people running 20x10 fronts. Your offset is very aggressive. It sticks out 12mm more compared to stock. Don't understand where you found that much room thyere :-)
Yes stock suspension. I ran M5 20x10 34mm 295/30r20 wheels and tyres at the front for about a month and had no issues which lead me in this direction.

https://www.6post.com/forums/showthread.php?t=1543272

The only thing is that at 180 degree of steering lock and when going onto an angle such as going up a parking ramp the front tyres rub slightly on the vents that are in the plastic at the front of the wheel arch. I don't think this is due to the width but more the increased height of the 285/35r20.

The Porsche Cup2 that came originally on the GT2RS is a 265/35r20 but is really wide with an 11.4" tread width vs the 285/35r20 I have which is 10.1". I might try and find some of those to fit at the start of next summer over here to see how they fit on the car.
__________________
SCOTT26 "So as an admirer of the M5 and a potential customer of an M5 Touring. I would run naked around the streets of Garching if they were to offer one."
Appreciate 0