Quote:
Originally Posted by swissfraser
To give us a little more context, is the door definitely unlocking? Have you tried using the physical key in the lock?
Not trying to patronise you, just trying to understand what the problem is and rule out the obvious!
Edit: does this thread help? https://www.bimmerfest.com/threads/p...andle.1404343/ |
Hey Swiss thanks for responding. the key option is not avail with the pass side door pulls. I did wind up pulling the card about 50% while the door was locked. I then removed the shadow line trim from the door and the the rubber trim around at the top of the door frame( The one with the door card horizontal slots.
This gave me access to look down and find the main lower hinge on the actuator.
there are two linkage controls on the actuator body. The first one visible when looking down the card back and that's the hinge for the interior pull handle, the linkage not visible and only accessible after pulling the above bits is the main linkage, and the one that controlled by the exterior handle.
I pushed down on that one and the door opened.
Beware of all the china actuators on ebay and amazon. The one thing i noticed after ordering pass/driver side actuators was the length of the cables, and although they work, they won't function correctly with soft close doors due to the length(extra 6in way to long to pull doors inward)