View Single Post
      08-16-2018, 09:43 AM   #1
Second Lieutenant
BadSeed's Avatar

Drives: ///M6 GC
Join Date: May 2015
Location: OC | CA

iTrader: (0)

Garage List
2015 BMW M6  [0.00]
2010 BMW M5  [0.00]
2021-1 North America NEXT map

2021-1 North America NEXT map is now available.

Note: I don't sell FSC codes.

Part 1 here >>>:

Part 2 here >>>:

>>> Fix download quota exceeded <<<

1: Select link with the file which you are trying to download

- when the web page loads, login with your Google account

2: Right click on file & select make a copy

3: Navigate to your google drive, My Drive folder & locate the file you want to download

4: Right click on file & click on download

5: When you finish downloading, delete the file from your My Drive folder then go to the trash & delete it forever.

Repeat steps above for the 2nd map link.

>>> Saving map files|folders to USB drive <<<

- 32GB or bigger capacity required
- FAT32 file system

- Free software to format large capacity USB drives to FAT32 >>>:

1. Map files|folders must be saved on the root of the USB drive

2. When viewing contents of the USB drive, you should ONLY see the files|folders below.

3. If they are inside another folder or if there are hidden files (added by using a MAC\OSX) then it will not work.

TIP: Buckle driver side seatbelt to prevent iDrive from going to sleep during the upgrade


If you have E-Sys & an ENET cable, follow the steps below for generating your DE.FSC file.

Prerequisite: disable all firewalls, Antivirus. Set Ethernet to DHCP (not static). EDIABAS 7.3.0 installed
1. Connect ENET cable to OBD port
2. Connect ENET to laptop Ethernet port
3. Wait until ALL lights in instrument cluster\dash turns off
4. Turn on Ignition, press START button (DO NOT step on the brakes, engine does not have to be on)
5. Wait until Ethernet has yellow exclamation ! Open command prompt & type ipconfig
6. Ensure you have IP address for Ethernet
7. Wait 2 minutes
8. Launch E-Sys
9. Select Connect

10. Select appropriate Target (based on I-Level)

Note: Don’t use _DIRECT

11. Select Connection via VIN
12. Select Connect
13. Click Expert Mode
14. Select FSC Extended

15. Diagnostic Address (hex) = 0x63
16. Click Identify

17. Application Number (hex/dec) – 0xDE
18. Upgrade Index (hex/dec) – 0x1

19. Scroll down & select StoreFSC
20. Select Add to the batch button (>>)

21. Select Read
22. Select Save
23. Use the following naming format when saving FSC file. XXXXXXX_000DE001.fsc
Note: XXXXXXX is the last 7 of your VIN

Uploaded all the files I use here >>>:
Free software to extract the compressed files & folders >>>:

>>> Generating FSC code for map updates - BMW_CIC_FSC_Generator.exe <<<

All credit goes to the software developer(s)

1. Extract BMW_CIC_FSC_Generator.exe from the ZIP file
2. Open BMW_CIC_FSC_Generator.exe
3. Select OK to download Lookup.xml file (computer needs internet access)

4. Select OK then close and open the program again

5. Select NBT then use Browse button to select FSC file
Map type = Next
Suggestion: check mark on Lifetime
Select Generate button


>>> Determine Region & Map sequence code <<<
Note: requires HxD application:

Region & Map sequence code - located in the 1st folder of the map files
File path = 1\INFO_MAP_NANT_#####\Info_Map.imp

North America NEXT:

Last edited by BadSeed; 09-12-2020 at 11:16 AM..