FS: ADV.1 ADV06R 21x9 +29 21x10.5 +35, F10 M5 or F06/F12/F13 6series (Non M6) fitment

[dclin]

BIMMERPOST / Classifieds

Asking Price:

USD 4,500.00

Item Interest

Practically mint, ADV1 ADV06R wheels in 21x9 +29 and 21x10.5 +35, flat black centers and gloss black outers/lips, with Toyo T1Rs mounted, sized 255/30/21 and 295/25/21, approximately 90% thread left. There are no curb rashes or scratches. There are some marks in the lug hole pockets from installation, but will not be noticeable once installed, unless you have your nose to the wheel.

http://www.adv1wheels.com/wheel-coll...n-spec-wheels/

https://www.tirerack.com/tires/tires...del=Proxes+T1R

$13,600 retail, wheels alone. Tirerack has the Toyo T1Rs in these sizes at $971.88

I am selling for $4500 + shipping

This will fit:

F10 M5 (stock specs here: http://f10.m5post.com/forums/showthread.php?t=676094, but its 9Jx19 ET32 and 10Jx19 ET34 for 19"s, and 9Jx20 ET34 and 10Jx20 ET34 for 20"s)
F06/F12/F13 6 series (non M6), which these were originally ordered for

You can verify the sizes by calling ADV1 and ask for Jon Gutierrez. Order number for these wheels is 7459 (it's embossed on the front of the wheels - see pics - like other ADV1s) https://www.adv1wheels.com/contact/

First and foremost, for me, ADV.1s are the holy grail of wheels. There are many other great wheel companies for sure, but being involved with cars since the mid '90's, and having over 25+ sets of various aftermarket wheels and tires for various cars over the years, the past few years has had me lusting for a set.

Frankly though, I have a hard time justifying paying so much for a new set (these, according to verification with ADV.1, retails at $3400 a piece), and when these were posted by another member, I jumped at the chance. Was told they were 21x10 and 21x11, which is what would be perfect for my M6. However, upon receiving them and verifying with ADV.1 themselves, this was a set that was ordered for a 2016 650i (F06/F12/F13). Needless to say, I should have done my homework.

I have literally been tearing myself apart, debating if I should just keep these, put spacers on them, and live the with narrower wheel width of front (stock is 9.5" up front) - they are soooo beautiful. But, I have come to the conclusion that cannot and will not do that. So, for a fleeting moment at least, I owned a set of ADV1 wheels.

The original seller has offered to buy back the wheels, but rather than simply make Fedex that much more richer, I have decided to make them available, with all of the correct information, so that you can make sure it is the right fitment for you. I know this will fit a 6 series (but not M6 obviously), but should also a F10 M5. I do not believe it will fit a standard F10. It may fit others, but I am not advertising as such.

I am simply wanting to break even, and pass on an awesome deal to someone. Definitely prefer local pick up in Houston, TX, however they are in the boxes and ready to ship. Will be cross posting to M5post, 5post.

[Eurohorses]

oh man!!! May i ask why you are opposed to running spacers? These wheels are gorgeous! And at $4500, they are almost free!

[dclin]

Originally Posted by Eurohorses

oh man!!! May i ask why you are opposed to running spacers? These wheels are gorgeous! And at $4500, they are almost free!

To be honest, I'm starting to warm up to the idea of spacers. Don't know, always kind of thought of them as bandaids. Then again, if H&R makes them, I suppose they are ok.

[Eurohorses]

Originally Posted by dclin

To be honest, I'm starting to warm up to the idea of spacers. Don't know, always kind of thought of them as bandaids. Then again, if H&R makes them, I suppose they are ok.

Forget H&R....

Go with Macht Schnell Spacers. Spacers are a great option and once they are hubcentric (10mm and up) you'll be in good shape. Many people, including myself, have ordered wheels from HRE, ADV, DPE, that were built to the spec of our cars, but have gone ahead and added spacers to have that super flush look. It all depends what you're looking for.

But i would not dismiss the option. If i were you and I landed those wheels at that price, i would keep them. deals like that do not occur every day.

[dcm95ss]

Still for sale?

[dclin]

Originally Posted by Eurohorses

Forget H&R....

Go with Macht Schnell Spacers. Spacers are a great option and once they are hubcentric (10mm and up) you'll be in good shape. Many people, including myself, have ordered wheels from HRE, ADV, DPE, that were built to the spec of our cars, but have gone ahead and added spacers to have that super flush look. It all depends what you're looking for.

But i would not dismiss the option. If i were you and I landed those wheels at that price, i would keep them. deals like that do not occur every day.

Thanks for the feedback, I appreciate it. Yes, meant more that, if a major suspension manufacturer sells it, it's not a bad thing. =)

[dclin]

Originally Posted by dcm95ss

Still for sale?

No, I have decided to keep. Thanks for the interest!

[dclin]

Oh, tires will be available, possibly this week.
Toyo T1Rs 255/30/21 and 295/25/21 approx 2000 miles

$225 for front pair + shipping & 2.9% paypal
$250 for rear pair + ditto