04-11-2023, 10:05 AM | #1 |
Registered
0
Rep 1
Posts |
Problème voyant airbag après acccie
Hi everyone, I have a BMW F13, I had an accident which triggered the passenger roof airbag, the driver's seat belt and the driver's pretensioner...
I replaced all the elements and all the errors went away except that of the driver's belt force limiter. Code: 930933 Driver's belt force limiter: Resistance too high Because BMW didn't give me the right seat belt, so I got this error. How could I cheat? with resistance? or coding? I specify that BMW do not want to take back the belt from me because I bought it a few months ago and I have only just climbed. I thank you in advance |
04-12-2023, 12:38 AM | #2 |
Captain
251
Rep 631
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
First, measure the resistance of the belt electronics to make sure that is the problem and not a wiring problem. An open circuit in the wiring will give the same code. (open = infinite ohms)
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|