02-01-2018, 12:02 PM | #1 |
Private First Class
24
Rep 149
Posts |
10MM Spacers All Around .
Hey ,
I Just Installed 10MM Spacers in the front and in the rear wheels . I Do think they are Amazing , Defenitly better looking and More Agressive . |
02-01-2018, 12:41 PM | #2 |
Lieutenant General
4985
Rep 11,891
Posts |
wow, I can see the difference. IMO, it's not worth the fender damage.
I just washed my car again, 2 months post-delivery. I found 1 major rear fender damage caused by gravel, IMO, due to the staggered setup. The rear spacers will just wreck havoc on your bumper. Keep an eye out every few weeks, you'll see what I'm talking about.
__________________
22 Phytonic/Coffee X5 45e (CoVID-free)
08 Speed Yellow 911 GT3 Sharkwerks 12 AW/Cinnamon X5d Sports Pkg (retired) 14 AW/Beige M6GC ZCP, MPE, V2 steering wheel, vorsteiner (retired) 08 SSII/Black E90 M3 (retired) Last edited by Flying Ace; 02-01-2018 at 01:20 PM.. |
Appreciate
0
|
02-01-2018, 01:08 PM | #3 |
Captain
366
Rep 804
Posts |
I've never had good luck with spacers, i always feel a vibration in the steering wheel the faster I go every time I have had them installed on the fronts. The rears are usually ok but now that I'm running 315's I don't need spacers.
|
Appreciate
0
|
02-01-2018, 01:23 PM | #4 | |
Private First Class
24
Rep 149
Posts |
Quote:
Maybe I will do Vinyl Wrap to Rear Section Of the Car to Keep It Safe . Maybe Nano Coating ..... |
|
Appreciate
0
|
02-01-2018, 01:31 PM | #6 | |
Private First Class
24
Rep 149
Posts |
Quote:
I think They Had to be Hub Centric , otherwise it will Cause vibration . I did 140-150 km/h ( About 100 mile/h ) speed test drive on highway and it was okay , No shaking or Any Vibration . I Hope It stay's Like That 😁 |
|
Appreciate
0
|
02-01-2018, 02:05 PM | #7 | |
Lieutenant General
4985
Rep 11,891
Posts |
Quote:
Look into a clear bra just for that section (or the entire rear bumper.)
__________________
22 Phytonic/Coffee X5 45e (CoVID-free)
08 Speed Yellow 911 GT3 Sharkwerks 12 AW/Cinnamon X5d Sports Pkg (retired) 14 AW/Beige M6GC ZCP, MPE, V2 steering wheel, vorsteiner (retired) 08 SSII/Black E90 M3 (retired) |
|
Appreciate
0
|
02-01-2018, 04:12 PM | #8 |
Captain
366
Rep 804
Posts |
I've always used high quality spacers that are hubcentric, Macht Schnell or BMS. The issue with the M6 Gran Coupe, you cannot fit anything less than 15mm on the fronts as the hubs stick out that far and 15mm was too much for me on the fronts so I put 12mm on the rears but then took them off once i installed 315's on the rear.
|
Appreciate
0
|
02-01-2018, 04:39 PM | #9 | |
Private First Class
24
Rep 149
Posts |
Quote:
Here more Photos : |
|
Appreciate
0
|
02-16-2018, 01:42 PM | #10 |
First Lieutenant
209
Rep 315
Posts |
Nice! Looks great.
Would you happen to have a side shot showing the full car in profile or 3/4 angle? Like, not so up close, but showing the whole car instead? Sorry, I know a lot of folks have asked for pics already, but 1. it looks killer, so we all appreciate it, and 2. I'm contemplating spacers myself, but want to see how it looks with the stock suspension (I assume I'm not the only one). Thanks! - Leo. |
Appreciate
0
|
02-17-2018, 06:21 AM | #11 |
Lieutenant
271
Rep 425
Posts |
I’m running. Mach Schnell 12mm front and 10mm rear. I’ve found the key to avoiding vibration is to fully torque the bolts whilst the car is still jacked up.
Road rash is an issue on this car even without spacers. I’m looking into a possible for that based on the design of a car I had a few years back. I’ll keep you all posted! |
Appreciate
0
|
02-19-2018, 06:16 AM | #13 |
Private First Class
30
Rep 156
Posts |
try going over 160KM then you would notice.
|
Appreciate
0
|
02-20-2018, 10:28 AM | #14 |
Private First Class
24
Rep 149
Posts |
2 weeks ago I was testing my car with gps speed box , I did a 100-200 km/h and 100-300 km/h run test and reached 315 km\h without any shaking or vibration issue .
And believe me 315 km/h is very fast ? If there was Any vibration I'd notice !!! |
Appreciate
0
|
02-20-2018, 11:26 AM | #15 |
Private First Class
24
Rep 149
Posts |
[QUOTE=xxTHIR13ENxx;22794327]Nice! Looks great.
Would you happen to have a side shot showing the full car in profile or 3/4 angle? Like, not so up close, but showing the whole car instead? Sorry, I know a lot of folks have asked for pics already, but 1. it looks killer, so we all appreciate it, and 2. I'm contemplating spacers myself, but want to see how it looks with the stock suspension (I assume I'm not the only one). Thanks! another Picture : |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|