|
Post Reply |
|
Thread Tools | Search this Thread |
01-23-2017, 09:51 AM | #1 |
New Member
9
Rep 29
Posts |
Engine washing procedure and tips. Is there a proper way?
Engine bay getting dirty. Engine washing procedure and tips. Is there a proper way? As not to damage anything. How do you guys do it?
|
01-24-2017, 04:49 AM | #2 |
Major General
1545
Rep 8,970
Posts |
I wipe down the engine area and covers, under bonnet etc every wash, then it never gets grubby...
But if it needs cleaning I wet it first with a gentle very fine mist spray from your water hose gun, not a "jet" just a mist. Then spray on gunk or some other degreaser then work it in all over with a soft bristle brush before using the fog spray again to gently rinse it all off. All the electrical connectors are water proof as long as you don't use a high pressure. Dry it all off with towels and use absorbent paper towels to get water out of indents etc. Use can use something like THIS to put a matt shine back on the plastic bits. Then take it for a good drive to shake off / dry off any water. Good as new! |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|