Eisemann Race Tips Question

[jnkirk1974]

Does anyone know if Eisenmann (or anyone else) makes black or carbon fiber tips that I can put over my existing Eisenmann race exhaust tips?

[bobblehead]

for black, you can get them painted or powder coated at your local shop. If you want Eisenmann factory to do this, it will be a few hundred $. I asked this when I was getting it last year and decided not to do it after all.

IND Dist. wants $750 premium for their so-called 'Black series'.

[jnkirk1974]

Originally Posted by bobblehead

for black, you can get them painted or powder coated at your local shop. If you want Eisenmann factory to do this, it will be a few hundred $. I asked this when I was getting it last year and decided not to do it after all.

IND Dist. wants $750 premium for their so-called 'Black series'.

Thank you very much. So, there's not a slip-on option (just the tips), since I already own the system?

[bobblehead]

IND's are the entire system in black paint

Eisenmann factory can paint just the tip black. Eisenmann does not make any slip on tips at all (as far as I know). Therefore, your logical solution is to paint them yourself (or your local shop). But do NOT plastic dip the tip.

[Ryan@IND]

Originally Posted by jnkirk1974

Thank you very much. So, there's not a slip-on option (just the tips), since I already own the system?

Unfortunately, there is not a slip-on tip option. We charge $250 for powder coating or ceramic service on the exhaust tips. We highly recommend using either of those options as opposed to just a standard paint. This can be done by any shop with that capability. Just ensure that they properly mask the system and if you have a sport remove the valves prior to baking the system in the oven.

[bigbrian]

I have been thinking about doing this as well so I am glad you started this thread.

@Andrew@IND - Is it safe to powdercoat the tips "and" the mufflers (Race Version)? Or should we avoid doing the actual mufflers?

Brian