05-25-2018, 07:23 PM | #1 |
Private First Class
52
Rep 183
Posts
Drives: 2015 BMW 650i GC
Join Date: Feb 2015
Location: United States
|
Issue replacing door projectors
Has anyone successfully swapped out the door projectors on a GC? I took two out, but the wires are so short that they can't really be moved down from the door enough to access the connector and plug in a new one. My 550 had a couple of inches of wiring to work with, but not so on the 650i GC. Has anyone else seen this issue?
|
05-26-2018, 01:52 AM | #2 | |
Banned
433
Rep 459
Posts |
Quote:
projectors fit well, but I can't get them *fully* on in the back because the wires are too short to push the projectors in fully. Just left the regular lights in. Had 0 problems on my 528i tho. |
|
Appreciate
0
|
05-31-2018, 03:41 PM | #3 |
Enlisted Member
6
Rep 46
Posts |
I replaced all four on my car, there is enough slack in the wire, it's just secured to the inside of the door panel with some sort of clip or something, just tug on it and it will unclip, don't worry about trying to clip it back, just plug in the projector and tuck the wire up there. That's it.
|
Appreciate
0
|
05-31-2018, 04:10 PM | #4 |
Private First Class
52
Rep 183
Posts
Drives: 2015 BMW 650i GC
Join Date: Feb 2015
Location: United States
|
Thanks for all of the help! I'll get a little more "aggressive" with the wire pull and hope for the best.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|