08-13-2015, 10:49 AM | #1 |
Private
5
Rep 51
Posts |
KW HAS springs help
I have an M6 coupe 2013 and I got a set of KW HAS springs but I suspect these are the wrong parts.
I was wondering if there's anyone out there that has these springs and could take a picture of them and the serial number. Thanks in advance.
__________________
|
08-13-2015, 11:02 PM | #3 |
Supreme Leader
2281
Rep 6,548
Posts
Drives: G80, 996GT2, 996TT, 991RS 356b
Join Date: Jun 2006
Location: Fullerton, CA So.Cal.
|
__________________
SupremePOWER
1562 Kimberly Ave Fullerton CA 92831 Contact: sales@supremepower.com :: Shop# (714)632-1951 Sales & service of BBS Street & Motorsport products. BBS Highest Volume Dealer 2015 thru 2022 All the top brands at the prices and service you can count on. Professional installation. |
Appreciate
0
|
08-14-2015, 09:28 AM | #5 |
Private
5
Rep 51
Posts |
Stock, the car was 4mm lower in the back with the OEM springs. When you guys put coil overs do you keep it lower in the back or you lower the front more than the back?
Those are the part numbers from the website, but I understood that on the springs they have different serial numbers stamped in. And the front serial # is different than the back, so I want to find out which serial # is for front and/or back. A picture to show this would be really helpful. Initially the shop ordered the springs and when they put them on, the back was much higher than stock so they re-ordered the springs. After re-installing it went 33mm down in the front and only 20mm in the back. Thanks again for your help.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|