Access to truck for valve control power

[mrainv23]

Can anyone post some pictures or provide a detailed description on how to access the trunk so I can power my exhaunt valve controls for my meisterschaft. I have been running them open and would like the flexibility to close them occasionally during cold starts. It is ridiculously loud at 5am and wakes up my whole house...lol.

[F12M6MD]

One option is opening your fuse box, use a voltage detector to find a fuse that's only powered during accessory power (not always on), use a fuse buddy and power the valves via your selected fuse. Sorry I do not have any more specific info or diagrams.

Mark

[GladiatorOwner]

Fuse 134 in the trunk is home link. It shuts off when car is turned off. I know cause I use it for my radar.

[mrainv23]

Thx guys. I am actually just trying to get inside the trunk from the outside via firewall. Where is the firewall? I know the correct fuse.

[F12M6MD]

If you're just wiring from electronic valves to fuse box then you just need to remove the trunk tray and you should see some options where you can snake the wires into the trunk.

Mark

[mrainv23]

Mark is there a firewall in place already there that I can poke through then seal?