03-10-2018, 08:53 PM | #1 |
Captain
251
Rep 628
Posts
Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX
|
electric exhaust flap actuator
The technical specs that I found indicate that the exhaust flap valve position is adjusted using a Pulse Width Modulation signal of a 100MHz ranging from 10 to 90%. There is little need to have such a high frequency system for a slow moving device.
Are there any electronic gurus on the board that could give me some guidance on that control signal. I have just finished building the vacuum operated exhaust flap valve controller for my '14 M6 GC CP. Would like to do onefor the electrical flap controllers as well. Thanks in advance
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic The drive is the destination |
Post Reply |
Bookmarks |
|
|