04-22-2018, 03:24 PM | #1 |
First Lieutenant
123
Rep 396
Posts |
Coding Question
I used Carly to add the Torque/HP and Sport Mode displays to my F13, but for some reason they're not active. No dial pointers on the Torque/HP screen (though the range circles are displayed) and nothing is selectable in the "SPORT Mode". Is there something I yet need to do, or perhaps I applied settings in the wrong order?
Any help would be appreciated. Last edited by Cincinnatus; 04-22-2018 at 03:35 PM.. |
04-22-2018, 03:51 PM | #2 |
Second Lieutenant
30
Rep 264
Posts |
Not sure about carly, but if you code via e-sys here are the parameters
Enable Sports Displays HU CIC 3000>EFF_DYN_SPORT_CID set to: aktiv 3000>EFF_DYN_SPORT_UNIT set to: aktiv KOMBI 3008>DREHMOMENT set to: lb_ft (displays ft lb) 3008>LEISTUNG set to: ps (displays hp) |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|