06-17-2016, 01:48 PM | #1 |
Enlisted Member
2
Rep 37
Posts |
650i rear pdc sensors
Hey guys, I had a question regarding about the rear sensors. Now I'm in the process of making the rear of my 650 to a M6 but the problem I ran into was that the rear sensors for the M6 bumper were bigger then the stock 650s. So my question is do I have to just change the sensors and it'll plug&play with the wire harness it has now or do I have to change the wire harness as well? If I do have to change the harness is it a direct fit or I have to do so modifications to make it fit. Thanks guys
|
06-18-2016, 11:51 AM | #2 |
Private First Class
43
Rep 173
Posts |
Do you have a f13 msport? If so you don't have to mess with replacing rear bumper or sensors. All you have to do is replace the rear lower diffuser. I swapped mine grey 650i diffuser with an M6 one.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|