04-14-2015, 09:34 PM | #1 |
mrainv23
30
Rep 224
Posts |
Wheel torque lug nuts 21s?
I just put on my summer wheels and I am getting a lot of vibration. What torque should I tighten to?
__________________
2014 BMW M6 Gran Coupe F06/M Performance Black Grille/20% Tint/ Exec Package/ Driver Assist Plus/ Black on Black
Sold-BMW 550i F10/Dinan S3/ Eisenmann Race Exhaust/ Vossen CV3s |
04-15-2015, 06:41 PM | #3 | |
First Lieutenant
44
Rep 339
Posts |
Quote:
__________________
2013 F13 ///M6 Coupe - Singapore Grey
20" ADV.1 5.0 MV1SL with Pirelli Pzero's Custom Painted Grill, side markers and tinted front reflectors, Dinan Stage 1. |
|
Appreciate
0
|
04-15-2015, 10:59 PM | #4 | |
riding on rails
117
Rep 655
Posts |
Quote:
Brian
__________________
/// 2o13 m6 f13 . jb4 tuned . meth injected . msr intake . 21" adv1 wheels . eisenmann race w/ catless DPs . vorsteiner full aero . accuair e-level w/ bagged KW V3 struts . dinan sways . bel stir+ w/ alp jammer . jl audio subs
/// 2o13 x5m e70 . velos tuned . 22" adv1 wheels . dropped on kw variant3 coilovers . passport 9500ci radar & jammer. gets groceries fast |
|
Appreciate
0
|
04-19-2015, 06:47 PM | #5 |
mrainv23
30
Rep 224
Posts |
If I add a 5 inch extension do I need to compensate for this on torque settings? Neighbor told me an extension changes the lbs of torque. If it was horizontal I would agree but vertical I can't see how it would?
Wheels are fine now with 103 at the hub.
__________________
2014 BMW M6 Gran Coupe F06/M Performance Black Grille/20% Tint/ Exec Package/ Driver Assist Plus/ Black on Black
Sold-BMW 550i F10/Dinan S3/ Eisenmann Race Exhaust/ Vossen CV3s |
Appreciate
0
|
04-20-2015, 09:26 AM | #6 |
big pimpin
38
Rep 327
Posts |
depends on how long the Torque Wrench is too. 12-16" wrench with 5" extension will be about 72-78lbs.
so 12 inch wrench w 5" extension dialed around 147 would be 103? kinda getting to the nitty-gritty, not like NASA is gonna check. IVe been torqueing wheels for decades, never had a warp or one fall off
__________________
2014 //M6 GC
2015 750Li 2015 435i GC |
Appreciate
0
|
04-20-2015, 10:45 AM | #7 | |
Lieutenant General
1312
Rep 10,185
Posts |
Quote:
A "horizontal" extension (one that extends the length of teh wrech) does affect the value http://www.srtorque.com/Downloads/In...ns/857313D.pdf
__________________
BMW if you are reading, I need a job, Please. |
|
Appreciate
0
|
04-20-2015, 10:49 AM | #8 | |
Lieutenant General
1312
Rep 10,185
Posts |
Quote:
Only time you ever compensate is if you have a extension that changes the length from handle to tip. A 90 degree extension has negligible effect on the torque since it does not affect the lever length from handle to tip. A normal "vertical" extension has negligible effect on the torque This is a "vertical" extension and needs no compensation This is a "horizontal" extension and needs compensation on the 0' position, but not in the 90' position. Needs compensation in 0' position because lever length changes by E. In 90' position lever length does not change
__________________
BMW if you are reading, I need a job, Please. |
|
Appreciate
0
|
04-20-2015, 11:04 AM | #9 |
Live for today tomorrow never comes
1989
Rep 9,498
Posts |
[/B]140Nm
__________________
Live for now, life is too short.
2021 LCI M5 Marina Bay Blue/ Smoked White Leather |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|