06-15-2020, 10:55 AM | #1 |
First Lieutenant
209
Rep 315
Posts |
H&R vs Eibach - pics, please!
Hey everybody,
Just wondering if anyone can share a side-by-side picture/comparison between the H&R and Eibach lowering springs. I'm starting the process of dreaming and would like to see some samples. I know the difference is minimal (1.2" H&R vs 0.8" Eibach), but any help is appreciated. A few things to consider (preferably):
- Leo. |
06-15-2020, 01:43 PM | #2 |
First Lieutenant
219
Rep 360
Posts |
I believe XSTAR_007 is on Eibachs on his M6 GC (although I believe he is on 21" HRE's) and Flo1989 is on H&R's on his if you want to poke through some of their posts to get an idea.
I agree though some side by side shots comparing the two would be a nice resource. I'm in the process of putting M5 ZCP springs on my M6 GC to see if it will work as intended -- should provide ~0.5" drop which should be ideal for me. I'll post before and after pics if it works out
__________________
Last edited by LJohnson32; 06-15-2020 at 02:27 PM.. |
Appreciate
1
xxTHIR13ENxx208.50 |
06-15-2020, 10:21 PM | #3 |
Private
37
Rep 88
Posts |
Takes me a bit to post here, if you have IG feel free to browse any posts as I have a few shots running the Eibach’s on my OEM 20’s along with 21” MVForged set-up. Why not KW HAS and then you decide unless cost is an issue. If I started from scratch that is what I would do as there are days 0.2mm lower when on the 21’s I think would be perfect. That said where you drive may matter for clearance and personally on OEM wheels 0.8” seems right (with 10mm spacers)
IG: rwb_007_ |
Appreciate
1
xxTHIR13ENxx208.50 |
06-16-2020, 04:25 AM | #4 | |
Lieutenant
149
Rep 477
Posts |
Quote:
__________________
|
|
Appreciate
0
|
06-16-2020, 08:23 AM | #5 |
First Lieutenant
209
Rep 315
Posts |
Ok, with permission from XSTAR_007 and Flo1989, I don't think I can get a better comparison than this. lol.
EIBACH SPRINGS OEM 20" wheels H&R SPRINGS OEM 20" wheels Cool. - Leo. |
Appreciate
3
|
06-18-2020, 08:22 AM | #9 | |
First Lieutenant
209
Rep 315
Posts |
Quote:
Yeah, when I saw 007's angle, I knew I had seen your car sitting pretty much exactly the same. Hopefully this will help others in the future. In my opinion (no hate), I think 20" sits better on Eibach, but 21" look super on H&R's. - Leo. Last edited by xxTHIR13ENxx; 06-18-2020 at 09:47 AM.. |
|
Appreciate
0
|
06-18-2020, 08:55 AM | #10 | |
Lieutenant
344
Rep 433
Posts |
Quote:
|
|
Appreciate
0
|
06-18-2020, 09:47 AM | #11 |
First Lieutenant
209
Rep 315
Posts |
/end thread
Pretty much summarizes what we were trying to accomplish here. Last edited by xxTHIR13ENxx; 10-07-2020 at 03:48 PM.. |
Post Reply |
Bookmarks |
|
|