Dome Lights

[mike_lam]

Does anybody know how to remove the dome lights up front and the lights that shine in the back? I've used a trim tool and popped it mostly off, but having a hard time actually removing it and I have no idea how to tackle the back lights. Trying to change to LED's.

[mike_lam]

Nothing... This forum is useless

[JMHP]

This is a pretty cool forum, don't know if you're being funny or frustrated... Anyway, https://www.ecstuning.com/b-ziza-par...f10ledinterkt/

Check the install sheet option at the bottom... may help

[Mr.SugarSkulls]

Originally Posted by mike_lam

Nothing... This forum is useless

Leave then

[mastermayhm]

Originally Posted by mike_lam

Nothing... This forum is useless

i see you have contributed quite a bit here too.........

Originally Posted by JMHP

This is a pretty cool forum, don't know if you're being funny or frustrated... Anyway, https://www.ecstuning.com/b-ziza-par...f10ledinterkt/

Check the install sheet option at the bottom... may help

^this is what i used to get mine off

Originally Posted by Mr.SugarSkulls

Leave then

^+1 haha

[Six cent quarante]

I just changed the front (only) dome lights to LED on my 2013 F13. The ECS Tuning instructions were very helpful. Even though they are for an F10, the parts are the same. Once you get the rear of the dome assembly popped off, go for the front left clip. then the right side clip after removing the black trim piece. Then the left side clip. If you shine a flashlight into the holes under the trim piece, you can see the clips. It took me about 45 minutes to get the assembly off. Go real slow, and you won't crack anything.

[2007 to 2016 M6 Cab]

Originally Posted by mastermayhm

i see you have contributed quite a bit here too.........

Leave then

^+1 haha